* Read * |
Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. This gives your passenger good mid-range comfort. Sorry folks, but the removable passenger backrest isn't available in this seat model... there's just nowhere to put the hardware for it safely. (Have you looked under that seat?) On the other hand, we did integrate hardware to use your Ducati seat cowling. Just bolt it onto the Corbin seat as you would with the stock seat for a fast, solo look. We provide two chrome button head screws with the saddle to use in the seat sides when the cowling is not installed. This keeps things nice and clean!
Notice how close the Corbin saddle fits to the tank, tail section and sides... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look on the motorcycle and adds to the custom appeal.
On top, we include genuine leather seating panels for a luxurious ride. Our standard design includes Black Carbon-Fiber leather rider seating with Asphalt vinyl contrasting sides, center stripe (Trim) and passenger area. Corbin's asphalt material gives a nice texture that mimics that of the black frame components and ties in the tank stripe too. Because the seat is designed to mate up nicely with the Ducati seat cowling, we do NOT recommend using a "welt" on this saddle model.
We use genuine leather seating in all of our saddle models because it breathes with your body and will conform along with the foam shape during break in. This provides an added bit of luxury on those long rides. In the side panels, we use a coordinating vinyl material that will support the foam shape and keep the saddle looking sharp longer. Be sure to care for you leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.
Mounts to the motorcycle like the stock seat. Functions on key lock system with brackets preinstalled on saddle.
Corbin now uses this special "Italian Flag" logo on all of the saddles we make for Italian motorcycles. If you prefer the standard Corbin stitch, please specify when ordering. |
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1. | |
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more... | |
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button. | |
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works. | |
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info | |
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away. | |
Measurements: |
Rider seating: 13" wide x 10" long Passenger: 10" wide x 10.5" long Approx seat height: 30" |
Saddle mounts like stock with a tongue in the front and latch pin in the rear. Corbin latch integrates with your stock Ducati key lock. | |
Saddle includes two chrome button head screws to use in the side of the saddle when the seat cowling is not used. | |
Due to the tight tolerances with the seat cowling, a "welt" is not recommended in this cover design. | |
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you? | |
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition. |
Saddle Cream Take good care of your new seat and it will take care of you! Perfect for all your leather goods. $25 Apparel We're often asked about tees and such so we caved in and had some Corbin gear made up. *Shop* Furniture Barstools & auto designs. Ready for a Corbin seat inside your house? A big hit for the man cave! *Explore* |
Testimonials: | |||||||
Comments? | Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM. | ||||||
Submit Photos: | Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM! | ||||||
General Contacts |
|
  | ITEM | DESCRIPTION | PRICE | |
#D-M11-9 | Dual Saddle, Monster 1100 & 796 | $649 | ||
COVER | Select Your Material Options Below | |||
Seating Material - Leather Recommended | ||||
Side Panels - Vinyl Recommended | ||||
Stripe Material | ||||
Tail Material | ||||
Stitching Color | ||||
Stitch Color for Corbin Logo | ||||
Enter Special Instructions Below | ||||
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button. | ||||
If you are concerned about how a material is going to look, we will be happy to send samples at no charge. Just go HERE and use the Chatbot to order. |
NOTE: Corbin products are designed to fit very close for cleanest look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you. Corbin Accessories should never be used with missing or damaged hardware as this can create an unsafe situation for rider &/or passengers. |
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount. |
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges. |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA). |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, PLEASE READ |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges. |
Hand Made with Pride in the USA since 1968 | |
©Corbin-Pacific Inc | Privacy Policy | 800-538-7035 | Follow Us: |