Corbin backrests are removable AND easily adjustable to tailor its fit to your co-pilot's posture. A simple setscrew on the rear of the backrest sets the angle without removing it from the seat. Installation is also very simple and requires just a single screw under the saddle. Support hardware is built inside the seat to keep a very clean look on your bike without external brackets.
Notice how close the Corbin saddle fits to the tank, tail section and sides... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material may be heavier than stock, but it fits perfect to the bike and provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look with more square inches of body contact while we keep it narrow in the nose to allow for ground reach.
For an added touch of luxury, this saddle is available with the option of electric seat heaters. This feature is just the ticket on those chilly morning rides to help shrug off the cold and enjoy the sunrise. The Corbin heating system is built completely into the saddle for simple operation. A switch on the left side of the seat turns it on while the seat maintains temperature automatically. We include a wiring pigtail that integrates with your fusebox for simple installation.
On top, we include genuine leather seating so it breathes with your body and will break in along with the foam shape for a personalized fit. Shown here we've used Black Carbon-Fiber leather in the seating panels with Matte Black side panels, Royal Blue welting, Light Silver stitching and Silver Corbin logo. A classy, yet subtle combination.
We offer a wide range of leather styles and colors to suit individual taste at no extra charge. Be sure to care for your leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.
Corbin's one-piece saddle is not height adjustable like the OEM seat. Instead, we offer a Standard or Low seat to allow for riders of varying stature. Corbin's standard seat is similar to the upper mounting position of the OEM unit with additional room rearward. Our Low model provides a reach more like the lower seating of the stock seat.
Gunfighter & Lady saddle installs like stock with a tongue in the front and latch loop at the rear. Includes brackets premounted on the saddle to integrate with the Yamaha key lock system. If you opt for electric heat, we include a pigtail that integrates with the factory fusebox. Complete instructions included.
This saddle cover uses our new backrest hardware cover with the sliding door at the rear. To install the backrest, just slide the cover over to the side. When the backrest is not needed, just slide it closed. It doesn't get easier than that!
For Part Numbers, Pricing and Options, Please click on the ORDER tab.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1. | |
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more... | |
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button. | |
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works. | |
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info | |
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away. | |
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info... | |
Measurements: |
Rider seating: 14.5" wide x 14" long x 4" deep Passenger: 11" wide x 9" long x 10" deep with #BR backrest Rider seating LOW: 13.5" wide x 13.5" long x 4" deep Passenger: 11" wide x 10" long x 10" deep with #BR backrest |
Installation: |
#Y-TRC-21-GL-xx |
Corbin's saddle installs on your bike like stock with hardware preinstalled on the seat. If you order a heated model, we include a pigtail that connects into the OEM fusebox, all other components are preinstalled in the saddle. | |
Corbin's saddle installs on your bike like stock with hardware preinstalled on the seat. If you order a heated model, we include a pigtail that integrates with your fusebox. | |
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you? | |
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition. |
Saddle Cream Take good care of your new seat and it will take care of you! Perfect for all your leather goods. $25 Standard Ovalbac Our most popular backrest is the perfect blend of form and function. Nine inches of support. $345. *Learn More* Standard Backrest Similar to the Standard Ovalbac, but without the hole. Available Chrome studs too. $345. *Learn More* Ovalbac Edge Edge Ovalbac to compliment bikes with more angular lines. Eight inches of support. $345. *Learn More* Ovalbac Large Like the Standard Ovalbac with more support. 10" H x 12.5" W contact area. $345. *Learn More* Ovalbac Tee Extra large support cut away to provide clearance for passenger's legs. 13 inches tall. $345. *Learn More* Ovalbac Gunfighter The functionality of a backrest with the smallest appearance possible. Provides eight inches support. $345. *Learn More* Gunfighter Often used as a rider's backrest in Gunfighter seat models. Provides eight inches of vertical back support. $345. *Learn More* Corbin Glovebox Glove Box bolts up to your Standard model backrest (#297-SB & #02-SB) to provide four liters of locking storage. $518. *Learn More* Apparel We're often asked about tees and such so we caved in and had some Corbin gear made up. *Shop* Furniture Barstools & auto designs. Ready for a Corbin seat inside your house? A big hit for the man cave! *Explore* |
Testimonials: | |||||||
Comments? | Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM. | ||||||
Submit Photos: | Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM! | ||||||
General Contacts |
|
  | ITEM | DESCRIPTION | PRICE | |
#Y-TRC-21-GL | Gunfighter & Lady saddle, no heat, Yamaha Tracer | $649 | ||
#Y-TRC-21-GL-E | Gunfighter & Lady saddle w/ Heat, Yamaha Tracer | $820 | ||
#Y-TRC-21-GL-L | Gunfighter & Lady LOW, no heat, Yamaha Tracer | $649 | ||
#Y-TRC-21-GL-L-E | Gunfighter & Lady LOW w/ Heat, Yamaha Tracer | $820 | ||
#BR | Ovalbac Edge Backrest (each) | $345 | ||
COVER | Select Your Material Options Below | |||
Seating Material - Leather Recommended | ||||
Side Panels - Vinyl Recommended | ||||
Welt Material | ||||
Stitching Color | ||||
Stitch Color for Corbin Logo | ||||
Enter Special Instructions Below | ||||
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button. | ||||
If you are concerned about how a material is going to look, we will be happy to send samples at no charge. Just go HERE and use the Chatbot to order. |
NOTE: Corbin products are designed to fit very close for cleanest look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you. Corbin Accessories should never be used with missing or damaged hardware as this can create an unsafe situation for rider &/or passengers. |
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount. |
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges. |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA). |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, PLEASE READ |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges. |
Hand Made with Pride in the USA since 1968 | |
©Corbin-Pacific Inc | Privacy Policy | 800-538-7035 | Follow Us: |