Cool looks and ridin' solo is what the Gunfighter saddle model is all about! Notice how we've removed the hand rails and integrated the shaping of the solo tail to the Triumph bodywork... like sculpted artwork! Up front, an ergonomically developed bucket has been designed to remove the downhill slope of the saddle which will greatly help to reduce fatigue. Naturally, Corbin's sculpted bucket shape fits your body better than the flat stock seat for more square inches of body contact and long lasting support.
In the back, we provide a tail section that is designed for a fastback, race cowling look that gives your bike a cool solo appearance. Inside, the Gunfighter tail is padded and upholstered just like the front area to allow for short trip passengers. This makes this saddle design extremely versatile. Even though the Gunfighter tail is built with the same quality foam components, don't expect your passengers to be comfortable for long hauls as the shaping is not designed for that. Good medium to short range support can be expected.
Up front, ergonomic sculpting provides a better fit to your body and improved weight distribution. Neutralized seating posture curbs the tendency to slide in the saddle, which helps to reduce rider fatigue. Notice how the Corbin design has taken out the downhill posture of the OEM seat. Built up with our Comfort Cell® foam to provide a firm supportive ride mile after mile. To aid in ground reach, we've shaved the nose area of the seat narrower than the bucket to allow your legs clearance at stop signs. While riding, just slide back into the bucket for maximum support.
Like all Corbin saddles, this model includes genuine leather seating panels for a truly luxurious ride. To tie in nicely with the design of the Triumph we recommend the cover materials shown here which is: Carbon-Fiber laminated leather seating and Asphalt vinyl sides and tail section. The new asphalt material shown here looks perfect with the textured powdercoated chassis of the Triumph Sprint making a nice custom addition to your bike. Leather seating provides a perch that breathes with your body and will adapt with the foam shape during break in for a personalized fit. Over time, leather will mature to take on its own unique character, just be sure to care for it properly with a quality conditioner like our Saddle Cream.
Corbin's Gunfighter seat is designed to install easily on your bike and fit perfectly to the tank and tail section. We include a bracket with a stainless steel latch pin that installs on your bike using the same bolts as the Triumph hand rail. Once this bracket is installed, your saddle will mount with a tongue in the front and the built in lock at the rear. Please note this seat model was designed to work with the Triumph hand rails removed.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
KEY LOCK INSTALLATION:
This saddle model uses a new mounting system designed by Corbin
to allow installation and removal with a simple key lock. Once
the included brackets are installed, the saddle can be removed
easily by simply inserting and turning the key.
Need a
demo?
Just click the button.
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider seating: 12" wide x 12 long x 6.5" deep Approx seat height: 31.5"
Installation: Corbin's Gunfighter saddle includes a special latch bracket that enables your saddle to install or remove on a built in key lock system for ease of use.
Just mount this bracket in place of the handrail as shown and secure with the stock screws. Now slide the saddle into place securing the front of the saddle with the nose tongue and lower the rear of the saddle onto the latch pin. To remove, just insert the key, turn it and lift off the saddle... easy!
The Gunfighter will not work with Triumph Bags due to the use of the grab rail. However, the Gunfighter and Lady will work with the Triumph Bags due to the cut-outs for the grab rail.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
Just a note to tell you how impressed I am with my Corbin seat on my '03 Volusia. I have had it for over a year and a half now and have put about 30,000 miles on it. The seat performs awesomely, and I wouldn't trade it for anything! -Ken E. Customer for Life
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.