Corbin's Canyon Dual Sport saddle design for the ZX-14 gives true sport touring comfort for two riders on the big Ninja. Designed to maximize comfort and usability while providing a custom look and longer riding range. Corbin saddles are shaped to provide contoured support that lasts all day and will become your favorite accessory the first ride out.
This seat provides platforms that offer an increased area of body contact to give excellent weight dispersion and eliminate hot spots. Neutralized to curb the tendency to slide in the saddle which will greatly reduce fatigue. The shaping of the Corbin saddle relieves centralized pressure and supports from the sides instead. We build the saddle up with our exclusive Comfort Cell foam for a firm, supportive ride that lasts. Comfort Cell will support you for years and will provide a personalized fit after break in (approx 1,500 miles).
Another benefit of neutralized seating is that it creates a nice back support area for the rider. Notice how the step in the saddle gives both platforms a level posture and also creates four inches of lower back support for the rider. Even with the improved shaping, the Corbin Canyon Dual Sport saddle still works perfectly with the Kawasaki seat cowling.
Accepts an optional removable backrest for your passenger to add more comfort and security. Corbin�s backrest models install with a single screw and adjust easily to your copilot�s riding posture. We have several models of backrest available to suit your taste and the amount of support needed. Our Ovalbac model #02-SB (shown) also has backing plate options for a custom look and makes a great handhold for your passenger.
Canyon Dual Sport is available with optional electric heated seating panels for a luxurious touch on those chilly am rides. Heater units are completely self contained inside the Corbin saddle. Installation is simple and we include a pigtail that integrates with the Kawasaki. Complete instructions included.
Covered using genuine leather for a perch that breathes with your body. Our quality leather will break in along with your foam for a luxurious ride. Just make sure you care for your saddle with a quality conditioner like Corbin's Saddle Cream. For this model we've used black carbon-fiber leather in the seating with Carbonium vinyl sides for contrast and a grey stitch.
As an added value, Corbin's Ovalbac backrest models have a custom finishing plate option included at no extra charge. We have a standard leather-look plate (shown), a Carbon-Fiber look or you can even get a finishing plate that is paintable if you want to have it matched to your bike by your favorite paint artist. If you're looking to add a little storage to your bike, we also offer a Glovebox option for the rear of your backrest that adds 4 liters of locking storage for your travel essentials.
For Part Numbers, Pricing and Options, Please click on the ORDER tab.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
Measurements:
Rider seating: 13.5" wide x 15" long, 4" vertical support Passenger: 10" wide x 11" long
Saddle installs like stock and integrates with the factory key latch system. Brackets come preinstalled on the saddle.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
* Click the Product Image to Learn More *
Saddle Cream Take good care of your new seat and it will take care of you! Perfect for all your leather goods. $25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function. Nine inches of support. $345.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole. Available Chrome studs too. $345.
*Learn More*
Ovalbac Edge
Edge Ovalbac to compliment bikes with more angular lines. Eight inches of support. $345.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac with more support. 10" H x 12.5" W contact area. $345.
*Learn More*
Ovalbac Tee
Extra large support cut away to provide clearance for passenger's legs. 13 inches tall. $345.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance possible. Provides eight inches support. $345.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models. Provides eight inches of vertical back support. $345.
*Learn More*
Corbin Glovebox
Glove Box bolts up to your Standard model backrest (#297-SB & #02-SB) to provide four liters of locking storage. $518.
*Learn More*
Apparel We're often asked about tees and such so we caved in and had some Corbin gear made up. *Shop*
Furniture Barstools & auto designs. Ready for a Corbin seat inside your house? A big hit for the man cave! *Explore*
Testimonials:
...wanted to share my complete satisfaction with my new seats and your company's customer service. I received the seats in great condition and was very impressed with the quality of workmanship. Please count me as a very satisfied customer. -Charles B.
Comments?
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
Submit Photos:
Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles 2360 Technology Parkway Hollister, CA 95023 800-538-7035
Florida Showroom:
Corbin Saddles 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
If you are concerned about how a material is going to look, we will be happy to send samples at no charge. Just go HERE and use the Chatbot to order.
NOTE: Corbin products are designed to fit very close for cleanest look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Corbin Accessories should never be used with missing or damaged hardware as this can create an unsafe situation for rider &/or passengers.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.