If you really want to make some tracks on your Warrior, you're going to need the right equipment. Corbin's Dual Touring Saddle is just the setup for long range riding with two people on the bike. Both seating areas have been ergonomically shaped to provide more square inches of body contact. This provides even weight distribution and much better support for the long haul. It also relieves the centralized pressure on your tail bone (ouch). For complete luxury, our Dual Tour is also designed to work with the removable backrest in both seating areas.
For vertical support, add a Corbin removable backrest in either the rider or passenger position. Our backrests install easily using hardware built into the saddle and are fully adjustable for a tailored fit to your posture. This makes it very easy to use a single backrest transferred front to rear as needed. Or if you do a lot of two up riding, order two backrests for full time use. We offer five different backrest models to choose from, but recommend the Ovalbac® model #02-S for sculpted support and appropriate looks.
In the rider's position, we've built special hardware that allows the backrest to fold down while you throw your leg over the bike. This special hardware, internal to the saddle, also allows you to change the position of the backrest fore and aft to best suit your stature. Just fold down the backrest and change the length of the set screw as needed (range of set screw sizes included). This simple adjustment can be accomplished without removing the seat or backrest from the motorcycle.
For an added vintage touch, we've added the option of a Chrome V-Rail for this Dual Tour model. Corbin's V-Rail bolts up easily to hardware concealed within the side walls of the saddle for simple installation and a very clean look. This also makes a good hand hold for your copilot. NOTE: If you have any accessories installed on the rear fender of your Warrior such as Sissy Bars or Luggage Racks, the V-Rail may not fit properly on your bike.
Just like all Corbin saddles, the Warrior Dual Tour is built up with our exclusive Comfort Cell® foam for firm support that lasts all day. Almost twice as firm as the stock foam, Comfort Cell® stays resilient instead of smashing down like the stock seat. After a break in period, Comfort Cell® will actually take on your shape and provide personalized fit to your posterior providing even greater comfort. For this kind of comfort, be sure you specify an Authentic Corbin saddle!
Corbin's Dual Tour and backrests include genuine leather seating in choice of colors and styles. The model shown on this page is finsihed in all smooth black for a subtle and clean look, but we have over thirty styles of leathers to choose from. We also include chrome studs at no additional cost if you prefer (please specify when ordering). Genuine leather seating breathes with your body to provide a cooler ride and will break in along with the foam shape to conform to your body. Another feature that makes Corbin a real value in motorcycle accessories.
If you opt for one of the Ovalbac® series backrests as shown here (model #02-S), you can further customize the look of you bike with rear finishing plate options. Made of ABS, our standard model has a leather look to it, but you can also choose a Carbon-Fiber look, Aluminum look or primer if you want to custom paint one. For just a little extra, we can provide a finishing plate prepainted gloss black or a new Chromed steel model as shown. Please note, chrome back plates are only available for the model #02-S backrests.
To assure many years (and untold miles) of faithful service, be sure to care for your leather saddle with a quality conditioner like our Saddle Cream. This will help your seat to remain weather resistant and supple. Over time, your saddle will age and the leather will develop its own unique character just like your leather jacket. Just be sure to avoid cleaners or conditioners that contain petroleum products or kerosene!
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Rider seating: 14" W x 15" L x 16" tall Passenger: 11" W x 12" L x 11" tall
Saddle mounts like stock with adjustable bracket included. Be sure to specify the year of your motorcycle when ordering as there are different models available for various model years. To install, just slide the rear tongue of the saddle into the fender bracket and lower the seat into place securing with the stock key lock.
Adjustment of the fore and aft position is simple. Just fold the backrest down and install the appropriate set screw to lock in the backrest and set the forward position. Angle adjustment is even easier with an adjustment screw located at the base of the backrest!
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Corbin's Chrome V-Rail bolts up easily to your Dual Tour saddle with no additional brackets. Triple-plate chromed for a show quality finish, the V-Rail provides a nice nostalgic look for your bike. Does not work with Sissy Bars installed. *More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.
Dual Touring saddle, 2002 - 2003 Yamaha Warrior
Dual Touring saddle, 2004 - 2009 Yamaha Warrior
Ovalbac Standard Backrest (each)
Select Cover Options Below & Add to Cart
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Corbin Motorcycle Saddles & Accessories Have Been Made with Pride in the USA since 1968