Mike Corbin's 60th United States Patent! As with many Corbin products, the Glovebox design is so unique that it was awarded US patent #D545,073. Just one of the many innovative designs that enhance your riding experience with well thought out form AND function.
Corbin's new Glove Box is designed to bolt up to your existing Corbin backrest and give you a handy place to store some goodies. Fits backrest models: #02-S, #02-SB and #297B.
Naturally, it looks nice when installed and is designed for simple, bolt-on mounting. Comes complete with everything you need with two keys and either unfinished or prepainted Gloss Black (some OEM colors are also available). Inside there's a generous four liters of storage capacity for your essential travel items.
So how much is four liters of storage? Well, we've put in: a couple maps, a pair of gloves, two bottles of water, sunglasses, keys and a cell phone... with room to spare! Door opening is seven inches wide by five inches tall to give you an idea of what you can slip in there. Although we haven't broken one off in testing, we recommend a weight limit of five pounds to be safe.
Constructed of ABS plastic and hand finished to assure a quality finish throughout. On the inside, it comes fully lined to protect your cargo and even has a nice weather stripping around the door opening. Stainless steel hinge and mounting hardware assures your glove box will survive the harsh environment your bike is subjected to. Door lock is adjustable to keep your goodies secure.
So where can you use it? As you can see, anywhere you put a Corbin backrest! On the bottom side of the box, we've put a slightly flattened area to allow for clearance around seats and bodywork. There are a few exceptions to where the glove box will fit and these are noted on the specific seat models. Good on cruisers and sport bikes alike! Especially useful on bikes like the Honda VFR where there is no under seat storage available.
Corbin's glove box looks nice from any angle. Naturally it takes its shape form the backrests that it was designed to fit. Little bits of detail add to the looks of the box like the ribs along the trailing edge on each side and the molded area around the lock on the lid. Typical Corbin styling! Comes unfinished or pre-painted gloss black or in any paint color we currently offer for our Beetle Bags, Fairings or Chin Spoilers.
Installation is very simple and you can swap this box onto your existing backrest or get a dedicated backrest for it. All you need to do is remove your rear finishing plate by taking out the two screws in the back. Now replace the finishing plate with the Glove Box and secure with the two provided screws and large diameter washers. A little Loctite or similar thread lock material would be a good idea here. Always be sure your backrest safety screw is installed too!
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
Storage Capacity: 4 liters
The Glovebox is designed to bolt directly to the following Corbin model backrests: Standard Ovalbac® #02-S and #02-SB Standard Corbin #297-B.
Will not mount to backrests that have decorative studs in the cover.
Corbin Glove Box is available unfinished (black ABS) or painted in any color currently offered for our other accessories like saddlebags and fairings. Please check our General Info section for complete paint color availability. Due to the cost of materials, color match to Honda Illusion paint colors costs a little extra.
About Color Matching: Please be forewarned that the paint may not be a perfect match for the color on your motorcycle. Over the years we've determined there are differences in color from bike to bike especially once the paint has started to fade (reds and silvers are notorious for this). Due to this, we have established paint colors that are close for the widest range of bikes we could test with.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
If you don't currently have a Corbin backrest you wish to use with the Glovebox, you can order it as part of a kit below or check out all the models HERE.
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
2360 Technology Parkway Hollister, CA 95023 800-538-7035
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Glovebox Only, Unfinished
Glovebox Only, Painted
Glovebox Only, Illusion paint
Backrest w/ Glovebox, Unfinished
Backrest w/ Glovebox, Painted
Backrest w/ Glovebox, Painted Illusion
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.