Classic Solo saddle for 2004 - 2014 Triumph Rocket III
Click or Tap to Activate Item
The uniquely styled Classic Solo looks excellent on your Rocket III while providing an extraordinary amount of rider comfort. Notice how the sculpting of Corbin's seating platform conforms to the shape of your body for better support and more square inches of body contact. This is one of the secrets of long range comfort and is a staple of Corbin design. For added back support it accepts an optional rider's backrest that provides an additional nine inches of vertical support. For maximum versatility, Corbin's Classic solo will also mount in conjunction with your stock passenger seat and optional sissy bar / luggage rack.
Our removable rider backrest installs easily into hardware concealed inside the saddle for a very clean look. In order to fit a wide range of Rocketeers, it can be installed in two different positions and is fully angle adjustable. Average riders will want to install the backrest in the lower position, but taller riders can change the set screw location under the seat which moves the backrest up and rearward roughly 3/4 inch. Regardless of the mounted position, the backrest adjusts easily to your posture with a conveniently located set screw at the rear of the backrest.
For maximum versatility we've designed the Corbin components to interchange with the Triumph pieces. This also allows you to vary the look of your bike depending on your current riding needs. Install the Classic Solo by itself for a very clean solo look or add the Corbin backrest for touring quality support. Need to carry a passenger? No problem, just remove the solo seat, install your stock passenger pillion and remount the Corbin solo. Installation and removal is simple and uses the Triumph key lock system. Although the stock passenger seat is vinyl, the Corbin leather saddle works very well with it visually.
Notice how the shaping is designed to emulate the contour of your body. This gives excellent support for longer range comfort. Our neutralized seating also helps to curb sliding in the saddle which greatly reduces rider fatigue. Inside, the saddle is built up with our exclusive Comfort Cell® foam for a firm, supportive ride that lasts. Corbin saddles feel firm when you first ride on them, but this firmness is what supports your body and maintains the correct shape. Over time, Comfort Cell® will break in and provide a personalized fit to your body for even greater comfort.
Corbin's Ovalbac series backrests come covered to match your saddle, but also offer the option of custom finishing plates on the rear. On this page we've used our chrome back plate to coordinate with the look of the bike. Notice how well in integrates visually with the Rocket III and matches up to the injector cover and other nice chrome tidbits. Backrests come standard with an ABS leather look backing plate but you can choose an aluminum look, carbon-fiber look or even a paintable model at no added charge. For a little extra we offer pre-painted gloss black or the chromed steel model shown.
Saddle and backrest include genuine leather seating panels in your choice of styles. Leather provides a luxurious perch that breathes with your body enhancing comfort value. Leather will also break in along with the foam shape in support of the personalized fit. In the side panels we use a coordinating vinyl material to keep the saddle looking sharp longer and support the foam shape.
Leather seating will perform well for many years and add value to your Corbin investment. Over time it will develop its own unique character just like your leather jacket. Be sure to care for it properly with a quality conditioner like Corbin's Saddle Cream to keep the hide supple and weather resistant. This will assure your new saddle provides a long service life and remains looking nice. Beware of products that contain petroleum or kerosene as they will damage the hide and shorten its lifespan.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
Rider seating: 14.5" wide x 15" long Rider back support w/ #02-S: 12" - 13" Approx. seat height: 27"
Will fit the 2008 Rocket 3 model, but the 2008 Rocket 3 Touring model is different.
Installation: Installation of the Corbin Classic Solo saddle is simple and works on your stock Triumph key lock system. Mounting brackets come premounted on the seat so you're ready to roll right out of the box.
Simply remove your stock seat and slide the Corbin saddle into its place. Locate the tongue in the front of the saddle into the bracket on your frame and lower the latching pin into place in the Triumph bracket. Notice our bracket is designed with a double latch, so listen for TWO clicks.
To adjust the position of the Corbin backrest, just insert the backrest shaft into the hardware and align the threaded hole in the shaft with either of the two openings in the Corbin basepan. The hole closer to the top of the saddle will move the backrest up and rearward roughly 3/4 inches. Now tighten the safety screw securely. We also recommend the use of a light grip threadlock material like Loctite Blue in this instance.
To ease installation until the rubber bumpers on the basepan break in, it may be necessary to add a couple washers between the Corbin basepan and latch pin.
We recommend removing the seat from the bike when washing. In the case of the Rocket III, remember to cover your airbox when doing this to stop water from getting in!
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
2360 Technology Parkway Hollister, CA 95023 800-538-7035
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Classic Solo saddle, 2004 - 2014 Triumph Rocket III
Ovalbac Leather Backrest (ea)
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
Warning! Heater elements (when available) should never be installed in motorcycle seats used by riders that cannot sense heat.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.