The uniquely styled Classic Solo looks excellent on your Inian while providing an extraordinary amount of rider comfort. Corbin's seating platform conforms to the shape of your body for maximum support and more square inches of body contact. This is one of the secrets of long range comfort and is a staple of Corbin design. For added back support, our Classic Solo saddle accept an optional rider's backrest that provides an additional nine inches of vertical support. Also available in a CLOSE model that provides seating closer to the bars and slightly lower for easier reach.

Corbin backrests install easily into hardware concealed inside the saddle for a very clean look. In order to fit a wide range of riders, it is fully angle adjustable. Just install the backrest into the saddle, lock it in place with a single setscrew and adjust the backrest angle to suit. A variety of backrest styles are available to suit your taste and the amount of support desired. Shown above with our #02-SB Ovalbac backrest.

For maximum versatility we've designed the Corbin solo saddle to work with two different passenger pillion seats. Corbin's 50's pillion is built with our exclusive high-density Comfort Cell foam to provide firm support with a low, fender hugging profile. It comes decorated in your choice of leather styles to coordinate with your Corbin solo. This special Touring pillion is designed specifically to work with the Indian sissybar and provides your passenger with maximized seating area and touring class comfort. Sculpted ergonomically to eliminate hot spots and improve weight distribution. Both pillions install easily with all required hardware included.

Our 50's pillion looks excellent on the bike and will work with or without the Indian sissy bar. We actually have TWO models of the Touring Pillion, the model shown on this page works with the Indian sissybar and we have another model that works by itself or with the Corbin trunk. Both models of the touring pillion have increased area of body contact and are sculpted ergonomically for best support and weight distribution. This one is slightly smaller in order to fit between the sissybar uprights and support bar. If you will NOT be using the Indian sissybar and would like a little more passenger support, please view THIS PAGE.

For an added bit of luxury, the Classic Solo saddle has the option of electric heated seating. You'll be amazed how a heated seat can raise your core body temperature during one of those chilly morning rides. This system easily wires directly to the bike's accessory jack and provides heat with the flip of a switch. Heater unit is built into the saddle and comes preinstalled. Switch is conveniently located on the left side of the seat.

Shaping of the Classic Solo is designed to emulate the contour of your body. This gives excellent support for longer-range comfort. Our neutralized seating also helps to curb sliding in the saddle that greatly reduces rider fatigue. Inside, the solo and pillion are built up with our exclusive Comfort Cell® foam for a firm, supportive ride that lasts. Corbin saddles feel firm when you first ride on them, but this firmness is what supports your body and maintains the correct shape. Over time, Comfort Cell® will break in and provide a personalized fit to your body for even greater comfort. Click on the image at right to help determine which model of the Corbin Solo is right for you.

Corbin's backrests come covered to match your saddle and also offer the option of custom finishing plates on the rear. Backrests come standard with an ABS leather look backing plate but you can choose a carbon-fiber look or a paintable model at no added charge. For a little extra we offer pre-painted gloss black that coordinates perfectly with the look of the bike.

Looking to add a bit of storage to your bike? We now offer a slick "Glovebox" that bolts up to the Corbin backrests in place of a finishing plate (#297-B & #02-SB only). This little beauty provides four liters of locking storage with is plenty for all your small essentials like cell phones, maps, water bottles and even a spare pair of gloves. Fully lined on the inside to protect your cargo and the locking door keeps it all secure. Constructed of durable ABS and available prepainted gloss black. Check the Accessories tab for more information on the Corbin Glovebox.

Saddles and backrests include genuine leather seating panels in your choice of colors and styles and a tasteful diamond stitch pattern in the solo seat and ebroidered warrior feather in the pillion. Leather provides a luxurious perch that breathes with your body enhancing comfort value. Leather will also break in along with the foam shape in support of the personalized fit. In the side panels we use a coordinating vinyl material to keep the saddle looking sharp longer and support the foam shape. We also include genuine leather fringe and the option of chrome or black studs at no additional charge (be sure to specify when ordering). Leather seating will perform for years and add value to your Corbin investment. Over time it will develop its own unique character just like your leather jacket.

For your Indian sissybar we offer two different backrest pads. The standard model offers good passenger support sculpted to fit the shape of their back. Our Armrest models provides much more square inches of back support and the addition of armrests built in. Both models mount easily to your Indian sissybar just like the original backrest pad. Includes genuine leather back panels and comes fully coordinated to your Corbin saddle.

Indian offers this slick little fender mounted luggage rack for solo riders. It mounts to a single place on the rear fender and ties in with the Indian solo seat at the front. For the Corbin seat, we offer a special bracket that integrates with our pillion pad bracket. This allows you to use either of our pillion pads or easily swap them out for the fender rack when riding solo. See part number #I-RACK-BRKT below.

Regarding Seat Height: We measured the effective seat height of our Dual Tour and Classic Solo saddles and came up with numbers that don't jive with the OEM spec. We're not sure how they measured, but we made the Corbin saddles as low as practical to put the rider is the sweet spot on the bike. This changes the seat height, but we think this visual comparison makes more sense than the numbers. Just click on the image at right to check it out.

	UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
	FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
	COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
	ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
	PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
	GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
	CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
	ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
	Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.

Measurements:	Classic Solo seating: 16" wide x 16" long x 5" deep CLOSE Solo seating: 14" wide x 13" long x 5" deep Touring Pillion: 12" wide x 12" long 50s Pillion: 10" wide x 12.5" long Approx seat height: 28" Sissybar Pad: 12" wide x 9" tall Armrest Pad: 13" wide x 11" tall, 7" arms
Installation:	#I-S-E
	Installation: The Corbin Solo & Pillion Saddles install together and use a tongue in the front and a single bolt into your fender at the rear along with the two side bolts into stock locations on your bike. All brackets needed for installation come preinstalled on the Corbin components.
	AUDIO KIT NOTE: Corbin amplifier bracket (#I-AMP-BK) is required for the Classic Solo saddle to function with the Indian Concert Saddle Bag Audio Kit. This bracket lowers the unit so we can keep the improved ergonomics and rider positioning of the Corbin designed saddle. Bracket will be provided free of charge to owners of the Corbin Indian saddle.
	NOTE: The Touring Pillion shown on this page is specifically designed to work with the Indian Sissy Bar or Roadmaster trunk. If you will NOT be using the sissybar and would like a little more passenger seating area, take a look at the Touring Pillion on THIS PAGE.

#Conditioner Saddle Cream®	Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
#02-SB Standard Ovalbac®	Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
#297-SB Standard Backrest	The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
#02-L Large Ovalbac®	Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
#02-T Tee Ovalbac®	This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
#02-G Gunfighter Ovalbac®	If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
#GB Gunfighter Backrest®	All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
#GLOVE-BOX Glove Box	A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Sissybar Pads	Corbin offers two models of backrest pads to work on your Indian Sissybar. For more info on both of them, just click *HERE*

Testimonials:
Comments?	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts	Hollister Factory: 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Daytona Showroom: 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 General Mailboxes Hollister Factory Florida Showroom Online Service Center

Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.

Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.

	ITEM	DESCRIPTION	PRICE
	#I-S-E	Classic Solo saddle w/ HEAT 2014-2015 Indian Chief	$643
	#I-S	Classic Solo saddle no heat, 2014-2015 Indian Chief	$493
	#I-CS-E	CLOSE Solo saddle w/ HEAT 2014-2015 Indian Chief	$643
	#I-CS	CLOSE Solo saddle no heat, 2014-2015 Indian Chief	$493
	#I-50S	50's Style Pillion seat, 2014-2015 Indian Chief	$243
	#I-TP-ISB	Touring Pillion, 2014-2015 Indian Chief with Sissy Bar	$293
	#I-AMP-BK	Amplifier bracket for Indian audio. No Charge when purchased with seat.	N/C
	#ISB-PAD	Passenger Backrest Pad for Indian Sissybar	$183
	#ISB-ARM	Passenger Armrest Pad for Indian Sissybar	$332
	#I-RACK-BRKT	Indian Fender Rack to Corbin Solo installation bracket kit.	$35
	#02-SB	Ovalbac Leather Backrest (ea)	$218
	If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
	Seating Panels	Black Leather Asphalt vinyl Black Vinyl Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber leather Black Carbon-Fiber, hi-gloss Black Carbon-Fiber vinyl Black 'Ostrich' leather Black 'Shark' leather Black 'Snake' Blue Carbon-Fiber vinyl Bomber Jacket leather Bomber Jacket BLACK Brown 'Alligator' leather Burgundy vinyl Carbonium Charcoal Gray vinyl Charcoal Carbon-Fiber vinyl Charcoal 'Snake' leather Chocolate Brown leather Classic (Basketweave) leather Candy Red vinyl Emerald Green vinyl Forest Green vinyl Ghost Gray vinyl Goldenrod vinyl Gray leather Gray Partner's vinyl Gray 'Ostrich' leather Gray 'Snake' leather Harley Blue vinyl Indian Tan leather Interceptor Blue vinyl KTM Orange vinyl Lavender vinyl Ninja Red vinyl Navy Blue leather Orange vinyl Otter Brown vinyl Oxblood vinyl Pigeon Gray vinyl Plum vinyl R-80 Red vinyl Red Carbon-Fiber vinyl Royal Blue vinyl Silver Carbon-Fiber vinyl Sky Blue vinyl Smoke Gray vinyl Tan leather Tan 'Baby Alligator' Tan 'Ostrich' leather Taupe vinyl Teal vinyl Tomato Red vinyl White vinyl Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Side Panels	Black Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Indian Tan Interceptor Blue KTM Orange Lavender Ninja Red Navy Blue Orange Otter Brown Oxblood Pigeon Gray R-80 Red Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Welts	Black No Welts Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Braid Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Indian Tan Interceptor Blue KTM Orange Lavender Lime Green Ninja Red Navy Blue Orange Otter Brown Oxblood Pigeon Gray R-80 Red Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Stud Bands	Black Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Indian Tan Interceptor Blue KTM Orange Lavender Ninja Red Navy Blue Orange Otter Brown Oxblood Pigeon Gray R-80 Red Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Studs	No Studs Chrome Studs Black Studs
	Special Notes

	All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	Warning! Heater elements (when available) should never be installed in motorcycle seats used by riders that cannot sense heat.

   

	PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
	SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
	FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
	EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.