A very cool solo option for your Honda 750 Aero. Corbin's Stinger seat design offers excellent rider support and a sleek fastback tail section that hugs the fender. We've designed the seating area ergonomically to provide more square inches of body contact for proper weight distribution. This helps to eliminate hot spots and give you long lasting support. Bucket design of the saddle sits you down into the chassis for better balance and a more natural riding position on the bike. Designed to take our removable rider's backrest for added support. Backrest adjusts easily to your riding posture for a tailored fit.
Corbin's built up tail section looks cool and provides good back support to the rider... especially when combined with our removable rider's backrest. Although the tail section is padded and upholstered like the rest of the saddle, it is not designed to carry passengers for long distances. They CAN sit on the rear section for a short trip, but the shaping is designed primarily for a tough solo look. As you can see, this creates a very cool look on your bike.
Stinger is designed to work with any of the removable backrest models available from Corbin for added back support. We prefer the model #02-G as shown in the picture above, for a good combination of support and slick looks. The Corbin backrest is supported by internal hardware so there are no unsightly brackets to clutter up the look of your machine. Installation is simple with a single set screw locking the backrest in place. To ease mounting the bike, our internal hardware allows the backrest to fold down while you throw your leg over. A second adjustment let's you tailor the backrest position fore and aft to adjust your riding position.
Like all Corbin saddles, the Stinger comes standard with genuine leather seating in your choice of colors and styles. Leather makes a great seating surface for your bike because it will break in along with the foam shape and provide a perch that breathes with your body. At the top you can see a custom style that uses a variety of our Faux exotic skins. Naturally, if your tastes lean more towards the subtle, a plain black model is also available like you see here. The animation shows one in plain black and one with Faux-alligator seating, Faux-ostrich sides and our black Faux-snakeskin on the tail.
Stinger saddle is engineered to fit perfect to the tank chassis and fender for a totally custom look. Our seat mounts with a tongue in the front and a single screw into your fender at the rear. For a very clean installation use one of our chromed billet thumbscrews (#ACST-6m). They provide a very dressy look and tool free saddle mounting. Installation of the backrest is as simple as sliding a square peg into a square slot, then just fold down the backrest and insert the set screw from the top (see special notes below). Set the fore-aft position of the backrest by choosing the appropriate set screw from the included set.
Be sure to take good care of your leather seat with a quality conditioner like Corbin's Saddle Cream. Your seat will look nice for years and show character just like your leather jacket. On the inside, we use our high density Comfort Cell® foam to provide the correct combination of resilience and support. Shaping is designed to fit your body to eliminate hot spots and is sculpted in the nose to give you easy ground reach when you're at stop signs. When riding, slide back into the bucket and take full advantage of the ergonomic support.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
Rider Seating: 13" wide x 16" long Approx seat height: 25.5"
Installation: Stinger saddle installs easily with a tongue in the front and a single screw into your fender at the rear. For a tool free installation, use one of our Chrome Billet thumbscrews in this location. They look killer and make saddle mounting a snap.
To lock in the backrest and set it's position fore & aft, simple fold down and install the appropriate set screw. This will keep the backrest in place and adjust its position in one step. To change the position, remove the existing screw and change to one of the other ones supplied.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28 Metric: m5 x .8, m6 x 1.0 or m8 x 1.25 *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Stinger saddle for Honda Aero 750
Ovalbac Leather Backrest (ea)
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.