Dual Touring Saddle for 2013-2015 Honda Gold Wing F6B
Click or Tap to Activate Item
Designed to provide custom looks and big comfort gains, our Dual Touring Saddle is the most generously sculpted seating this side of your Barcalounger. Providing ergonomically designed perfection with wide, sculpted seating positions that create a larger area of contact for weight distribution. Shaped like your body to eliminate pressure points and give long lasting support that will keep you in the saddle all day.
Corbin's rigid fibertech basepan provides a perfect fit and is built low to hug the frame. This allowed us to create a foam shape that keeps you in the sweet spot which provides a feeling of increased integration with the bike and more positive feeling of control. Deep, supportive bucket design gives eight inches of vertical support (or 21" with #02-T backrest installed). All of this adds up to a very relaxed posture and comfortable ride.
Saddle is available with the option of electric seat heaters for an added bit of luxury. Corbin seat heaters are controlled via conveniently located switches along each seating position while temperature is maintained automatically. You just wire in the Corbin supplied pigtail and enjoy the warmth on those chilly morning rides.
Both the rider's and passenger's seating areas are designed to work with an optional Corbin backrest for added comfort and support. All Corbin backrest models are fully adjustable to fit a wide variety of statures and riding postures. Internal hardware keeps a clean look. In the front, our special hardware allows the backrest to fold down to ease mounting the bike and provides a secondary adjutment for rider positioning fore-aft.
The Corbin saddle works with a variety of backrest models to suit your taste and needs. Shown above with our Ovalbac T-Rest (#02-T) and Standard Ovalbac (#02-SB) models. T-Rest is larger to offer more support and looks appropriate given the size of the bike and saddle. It is narrower at the bottom to provide excellent passenger leg clearance and give more square inches of rider support, but is not recommended for use in the passenger seating area. The #02-SB Standard model works in both seating positions and provides excellent support of 9" tall x 11" wide.
If you have the deluxe model with a built in passenger backrest, Corbin offers a coordinated pad that works on your Honda upright hardware. Built larger for more body contact and more upright to provide a usable rest for your passenger. The Corbin model pad measures a whopping 14" at the base tapering to 6" at the top and stands 12" tall. Mounts on your upright just like stock with a slick ABS cover on the rear.
All components use our exclusive Comfort Cell foam to provide firm support that stays resilient indefinitely. We cast this special Closed Cell material nearly twice as firm as the stock foam to support your body weight. Soft foam allows your body to fall through it the longer you sit on it... once compressed, soft foam offers no resilience and you start to experience discomfort. That's why we always say "firm is a good thing!"
On the outside we include genuine leather seating inserts for total luxury. For a very classy and subtle touch we recommend our standard natural grain leather seating with Asphalt vinyl sides and a color coordinated welt if desired. We prefer leather seating because it is durable, will breathe with your body and adapt with the foam shape as it breaks in. Vinyl side panels help to support the foam shape and keep the cover looking nice longer. A wide variety of color and texture options are available by special order at no additional charge.
Saddle provides installation just like stock. Corbin saddle uses rear bracket transferred from your OEM seat. If you opt for electric heat, we include a wiring pigtail for the bike that connects easily to the Honda fusebox.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.
Rider seating: 19.5" wide x 15" long x 8" deep Rear area: 15" wide x 13" long Approx seat height: 28" Backrest Pad: 14" wide base x 6" wide top. 12" tall
Corbin Dual Touring saddle installs like stock and uses a bracket transferred from your OEM seat.
If you opt for electric heat, we provide a pigtail that connects directly to the accessory connector on your fusebox. All other components are preinstalled in the saddle.
Works on the Standard and Deluxe models. Dual Tour works with a Corbin backrest in the rear or with the Honda passenger backrest. Coordinated backrest pad also available.
We do not recommend use of the large #02-T model backrest in the passenger seating area, only in the rider's area.
Due to the configuration of the hand rails, we currently do not offer a rain cover for this seat model.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.
Dual Touring Saddle w/ HEAT, 2013-2015 Honda F6B
Dual Touring Saddle No Heat, 2013-2015 Honda F6B
Passenger Backrest Pad, 2013-2015 Honda F6B
Large Ovalbac Backrest, Tee model
Ovalbac Standard Backrest (each)
Select Cover Options Below & Add to Cart
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Corbin Motorcycle Saddles & Accessories Have Been Made with Pride in the USA since 1968