It didn't take Spyder riders long to figure out a comfort injection was needed for the new Can-Am street bike. For all of its technical prowess and Transformer-like visuals, the good folks at BRP left a bit to be desired when it comes to the rump rest. Fortunately, we knew just what to do about that!
We started by designing a two piece saddle to replace the oem single piece seat. For both, we developed a concave seating surface that conforms to the shape of your body and eliminates pressure points. This also spreads body weight over a greater area giving more square inches of body contact and support. Additionally, both positions are neutralized to curb sliding which reduces rider fatigue. This two piece design is part of Corbin's Modular Seating system which allows the rear saddle to be swapped out with our Smuggler Trunk.
As you can tell, this ergonomically designed shape provides a very nice visual effect that flows with the bike's sleek lines. Our Fibertech base material allows us to provide a perfect fit to every arc and contour of the Spyder bodywork while being rigid enough to support the carefully designed foam shape. Fibertech also provides the structural integrity needed for our internal backrest support system.
Corbin backrests (optional) are designed to install easily and lock in place with a single bolt. Built in angle adjustment allows Corbin backrests to be tailored to your riding posture quickly and easily. Use a single backrest to transfer front to rear as needed, or order two backrests for full time use. Choose from a variety of backrest styles to suit your taste (we recommend Ovalback #02-SB as shown above). Corbin's passenger seat will also work with the BRP backrest / luggage rack system in place.
Naturally, Corbin backrests are tailored to match your new Corbin saddle and provide an integrated look. Models like the #02-SB (shown) provide contoured support and maximum amount of body support. These models also offer finishing plate options to further customize the look of your Spyder. Backrests come standard with a leather look ABS finishing plate that can be ordered custom in a variety of styles... even chrome or paint matched for a little extra.
For an added bit of luxury, we've designed the front and rear saddles with the option of electric heat! Simple to install with all components built into the saddles. You just have to install a simple wiring pigtail on your bike and enjoy the warmth. A great feature to have when you're taking off early in the morning to beat the traffic! Convenient switch is located on the left side of the saddle. Once on, the saddle will warm up and maintain temperature automatically though an integrated controller. Both front and rear seats are available heated (or non-heated) and have separate switches to control them.
Saddles use our exclusive high-density Comfort Cell foam that allows us to build a supportive saddle without a bulky shape. Corbin's Wizards are masters at combining form and function into a saddle that makes you as happy to look at as it does to ride on. On top, we include genuine leather seating in a variety of distinct styles. If a clean, stealthy look is your thing go straight black... if you'd like something a bit more custom, our Trendsetter pattern features gray faux snake leather seating, Asphalt side panels and color coordinated welts. All styles include customer Corbin Spyder logo embroidered in the side panel.
Two piece modular seating design will allow for the addition of the Corbin Smuggler trunk. This clever trunk is designed to mount in place of a passenger seat and provide convenient, locking storage that integrates into the line of the bike. Since there was too much information about the trunk to add to this page, we've created a separate page for the Smuggler. You can check it out right HERE.
Simple installation with all required brackets included. Front seat uses Corbin designed hinge that bolts to a stock location on your bike and uses our own fold away prop-rod to keep the seat open while you're fueling. Once installed, seat will open to provide access to the fuel tank just like your stock seat. Rear saddle mounts using a built in Corbin key lock system that integrates to a bracket mounted to the Spyder. Passenger sensor is transferred from the bottom of the stock seat onto the Corbin passenger seat with just two screws.
Want locking storage, but have a passenger too often to use the Smuggler? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac model backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain black or prepainted (at additional cost). Check out the optional Glovebox via the Accessories tab.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Measurements
Rider seating: 16" wide x 17" long Passenger: 15" wide x 11" long
Measurements:
Rider seating: 16" wide x 17" long Passenger: 15" wide x 11" long
Front saddle mounts with included hinge and is designed to integrate with the stock "prop-rod". Once installed, Corbin seat will hinge up providing access to fuel tank and operates with Can-Am key lock system.
Passenger seat installs with Corbin integrated key lock system. All brackets and required components are included and install easily with common hand tools.
Passenger sensor transfers from the OEM seat onto the Corbin rear saddle with just two bolts.
Corbin's passenger seat does not work with the BRP rear seat cowling.
Corbin's saddle system works with the BRP passenger sissybar / backrest system and the optional luggage rack platform.
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Saddle comes standard with leather seating panels and Asphalt side panels. Choose the style you wish from the drop down list. Custom materials and colors are also available by special order. For additional information, just click on the "Glossary" or "Materials" buttons below. Please refer to the Accessories tab for backrests and other optional accessories.
ITEM
DESCRIPTION
COVER STYLE
PRICE
#CA-S
Front Saddle no heater, 2008Can-Am Spyder
$289
#CA-S-E
Front Saddle w/ Heat, 2008Can-Am Spyder
$489
#CA-R
Rear Saddle no Heater, 2008Can-Am Spyder
$259
#CA-R-E
Rear Saddle w/ Heat, 2008Can-Am Spyder
$399
#02-SB
Ovalbac Leather Backrest (ea)
$229
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available. 
All Corbin saddles (with very little exception) include 
