We begged, pleaded and downright grovelled for this bike to come stateside and Yamaha finally gave in. What a great piece of work it is too, but what sport touring bike is complete without a Corbin saddle? If you want to realize the full potential of your FJ, then this is the setup for you.
We've created a saddle design with generously sculpted seating platforms that conform to the shape of your body and provides for long range passengers too. This sculpted shaping gives more square inches of body contact area which, in turn, distributes your weight better. Naturally we've constructed the seat with our exclusive Comfort Cell® foam that will provide firm support mile after mile. Our unique foam material supports your weight better and breaks in to take on a personalized shape.
Our saddle includes built in hardware for a passenger backrest to add more passenger comfort. We make several backrest styles to choose from and you can find our more about them here. We recommend using the #02-S model backrest as shown above. Corbin's backrest is fully adjustable to provide a tailored fit to passenger's riding posture. Installation of the backrest is simple with a single lock screw going into your Corbin saddle from beneath. To really make your saddle combo look spectacular, you can choose from several backing plate options. We have a coordinating Carbon-Fiber look or can even supply one painted to match your factory paint for just a little more. Note: Backrest does not work with Yamaha trunk installed.
Canyon Dual Sport saddle and backrest include genuine leather seating in your choice of colors and styles. Leather seating breathes with your body to provide a more luxurious ride and will break in along with the foam shape to conform to your personalized fit. In the saddle shown here we used our Carbon-Fiber leather seating with coordinating Carbon-Fiber look vinyl side panels (using vinyl in the sides helps to support the foam shape and keep the saddle looking sharp.) For a custom touch we added a Ghost grey welt. Don't forget to take good care of your leather with a quality conditioner like our Saddle Cream. Your Corbin saddle will be your riding buddy for years.
Our single piece Canyon Dual Sport saddle installs on your bike like stock in place of the two-piece OEM unit. This provides more seating room for you and your passenger while fitting perfectly to your tank and tail section. Corbin's rigid Fibertech baseplate supports the foam shape and keeps the carefully engineered ergonomics intact. Mounting bracket comes pre-installed on the saddle for easy installation (see below).
Corbin's Canyon Dual Sport saddle is also available with the option of electric heat! This is the ultimate luxury for those chilly morning rides. Our heater is completely built into the saddle and includes a wiring pigtail that integrates with your Yamaha wiring. Installation is simple with complete instructions included. Temperature is controlled with an integrated thermostat that manages the heat automatically. Just flip the conveniently located switch and keep on rolling.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
CORBIN BACKREST SYSTEM:
The first and most versatile removable backrest system available
for motorcycles! Corbin's backrests provide added vertical back
support and long-range comfort. Supported by internal hardware
for a very clean look, the backrests adjust to the rider's profile
for a tailored fit and install or remove easily as desired.
A very popular option! Click the button for
additional information...
ELECTRIC HEAT:
As an option, we can include electric heat in this saddle!
This option provides a true bit of luxury for when the
temperature starts to drop. Installation is simple, with the
major components pre-built into the saddle. Just wire in the
included pigtail and you're ready to roll.
Click the button at left for
complete information...
Warning!
Heater elements should never be installed in motorcycle seats
used by riders who cannot sense heat.
VISUAL 3D CONFIGURATOR
Interactive Design Tool
#Y-FJR-13
Canyon Dual Sport, Yamaha FJR 1300, no Heater
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Rider seating: 14" wide x 14" long Passenger: 13" wide x 9.5" long Approx seat height: 32.5"
Installation: Mounting the saddle is simple and we even include the bracket. Slip the rear of your saddle under the luggage rack as far as possible, then lower the nose into position. Slide the seat forward around the tank and push down on the seat to latch. Your saddle now latches on your stock key-lock system. If you are using a passenger backrest, be sure to install that into the saddle first and lock it in with the supplied set-screw.
Corbin backrest does NOT work with Yamaha trunk installed.
Stitch pattern is required in the seating area of heated seats, photos coming soon.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
Honorable and exact service, great people. Note that I am an absolute Corbin advocate, as in loyalties and exposure. Corbin, I will forever be your best friend, and for your enemies I will become their worst nightmare! Semper Fi. -Cpl. Dan H.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.