Hollywood Solo saddle gives your Warrior a slick, low profile look while providing you with boulevard cruising comfort. Our Fibertech basepan provides a perfect, flowing fit along the tank, chassis and fender, but rides on rubber bumpers to protect your paint job. For two-up cruising we also offer a coordinated passenger pillion pad. Naturally, both pieces are built up with high density Comfort Cell® foam to provide a firm resilient ride despite the incredibly low profile. It’s seats like these that brought Mike to the development of our infinite ratio foam!
Hollywood Solo is a great setup if you want your Warrior to have a low and slammed look. Notice how the shaping matches perfectly to the tank and fender... this kind of fit is available only in a Corbin saddle. Our rigid Fibertech basepan provides a good foundation for the foam shape and is carefully designed to fit close to the chassis. Our exclusive Comfort Cell® foam is engineered with an ergonomic shape that provides a greater area of body contact for better weight distribution and maximum comfort. Sculpted shaping in the nose area assures you still have good ground reach at stop signs.
If you prefer a solo look or just want to show off that rear fender and snazzy paint job, you can run our Hollywood Solo without the pillion pad. This is a very clean look, but remember, you will have to remove a couple of brackets from the rear fender. Filling the screw holes with a nice chrome button head screw (not included) is a nice way to keep things looking clean. Corbin pillion pad bolts up to the solo with just two bolts and the whole assembly mounts using the stock key lock, so changing back and forth when desired is a simple procedure.
Our passenger seat is also built up with high density foam to give your copilot a surprising amount of support for such a slim profile. As with all Corbin saddles, both the Hollywood Solo and Pillion come standard with genuine leather seating a choice of colors and styles. On this page we show both decked out in Black Faux-Ostrich for a little custom appeal, but plain black is also available for a more subtle look. Leather seating is great for motorcycle saddles because it breathes with your body and will break in with the foam shape for a personalized fit.
Leather is extremely durable and works great for motorcycle saddles. Corbin has well over three decades of experience in motorcycle seat design and have found this to be the best material choice. (Just one of the many reasons you'll want to INSIST on a genuine Corbin saddle!) Over time your leather saddle will age and develop a unique character just like your leather jacket and boots do. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years. This will also help it to remain weather resist and conform to the shape of the foam during break in.
Foam density is an important factor in long range comfort (especially in low profile models like this one) and we always say... "Firm is a good thing". Corbin uses a very unique formula of purpose built materials in our manufacturing process. Combine this with over three and a half decades of design experience and you have what is commonly considered the World's Finest Motorcycle Seat. Comfort Cell® foam combined with our patented molding process deliver unmatched contoured support. Corbin saddles feel firm when you first ride on them, but will break in and adapt to your body and support you in comfort for years to come. Enjoy the ride on an authentic Corbin saddle!
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
KEY LOCK INSTALLATION:
This saddle model uses a new mounting system designed by Corbin
to allow installation and removal with a simple key lock. Once
the included brackets are installed, the saddle can be removed
easily by simply inserting and turning the key.
Need a
demo?
Just click the button.
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider Seating: 14" wide x 16" long Passenger: 8.5" wide x 13" long
Installation is simple and uses the stock Yamaha key lock system. The Hollywood Solo saddle mounts like stock on your key lock with latching bracket included. Pillion pad installs like stock with a tongue in the rear and two bolts into stock locations under the solo saddle.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
Honorable and exact service, great people. Note that I am an absolute Corbin advocate, as in loyalties and exposure. Corbin, I will forever be your best friend, and for your enemies I will become their worst nightmare! Semper Fi. -Cpl. Dan H.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.