If you really want to make some tracks on your Warrior, you're going to need the right equipment. Corbin's Dual Touring Saddle is just the setup for long range riding with two people on the bike. Both seating areas have been ergonomically shaped to provide more square inches of body contact. This provides even weight distribution and much better support for the long haul. It also relieves the centralized pressure on your tail bone (ouch). For complete luxury, our Dual Tour is also designed to work with the removable backrest in both seating areas.
For vertical support, add a Corbin removable backrest in either the rider or passenger position. Our backrests install easily using hardware built into the saddle and are fully adjustable for a tailored fit to your posture. This makes it very easy to use a single backrest transferred front to rear as needed. Or if you do a lot of two up riding, order two backrests for full time use. We offer five different backrest models to choose from, but recommend the Ovalbac® model #02-S for sculpted support and appropriate looks.
In the rider's position, we've built special hardware that allows the backrest to fold down while you throw your leg over the bike. This special hardware, internal to the saddle, also allows you to change the position of the backrest fore and aft to best suit your stature. Just fold down the backrest and change the length of the set screw as needed (range of set screw sizes included). This simple adjustment can be accomplished without removing the seat or backrest from the motorcycle.
For an added vintage touch, we've added the option of a Chrome V-Rail for this Dual Tour model. Corbin's V-Rail bolts up easily to hardware concealed within the side walls of the saddle for simple installation and a very clean look. This also makes a good hand hold for your copilot. NOTE: If you have any accessories installed on the rear fender of your Warrior such as Sissy Bars or Luggage Racks, the V-Rail may not fit properly on your bike.
Just like all Corbin saddles, the Warrior Dual Tour is built up with our exclusive Comfort Cell® foam for firm support that lasts all day. Almost twice as firm as the stock foam, Comfort Cell® stays resilient instead of smashing down like the stock seat. After a break in period, Comfort Cell® will actually take on your shape and provide personalized fit to your posterior providing even greater comfort. For this kind of comfort, be sure you specify an Authentic Corbin saddle!
Corbin's Dual Tour and backrests include genuine leather seating in choice of colors and styles. The model shown on this page is finsihed in all smooth black for a subtle and clean look, but we have over thirty styles of leathers to choose from. We also include chrome studs at no additional cost if you prefer (please specify when ordering). Genuine leather seating breathes with your body to provide a cooler ride and will break in along with the foam shape to conform to your body. Another feature that makes Corbin a real value in motorcycle accessories.
If you opt for one of the Ovalbac® series backrests as shown here (model #02-S), you can further customize the look of you bike with rear finishing plate options. Made of ABS, our standard model has a leather look to it, but you can also choose a Carbon-Fiber look, Aluminum look or primer if you want to custom paint one. For just a little extra, we can provide a finishing plate prepainted gloss black or a new Chromed steel model as shown. Please note, chrome back plates are only available for the model #02-S backrests.
To assure many years (and untold miles) of faithful service, be sure to care for your leather saddle with a quality conditioner like our Saddle Cream. This will help your seat to remain weather resistant and supple. Over time, your saddle will age and the leather will develop its own unique character just like your leather jacket. Just be sure to avoid cleaners or conditioners that contain petroleum products or kerosene!
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
CORBIN BACKREST SYSTEM:
The first and most versatile removable backrest system available
for motorcycles! Corbin's backrests provide added vertical back
support and long-range comfort. Supported by internal hardware
for a very clean look, the backrests adjust to the rider's profile
for a tailored fit and install or remove easily as desired.
A very popular option! Click the button for
additional information...
KEY LOCK INSTALLATION:
This saddle model uses a new mounting system designed by Corbin
to allow installation and removal with a simple key lock. Once
the included brackets are installed, the saddle can be removed
easily by simply inserting and turning the key.
Need a
demo?
Just click the button.
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Rider seating: 14" W x 15" L x 16" tall Passenger: 11" W x 12" L x 11" tall
Saddle mounts like stock with adjustable bracket included. Be sure to specify the year of your motorcycle when ordering as there are different models available for various model years. To install, just slide the rear tongue of the saddle into the fender bracket and lower the seat into place securing with the stock key lock.
Adjustment of the fore and aft position is simple. Just fold the backrest down and install the appropriate set screw to lock in the backrest and set the forward position. Angle adjustment is even easier with an adjustment screw located at the base of the backrest!
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
The seat draws an enormous amount of interest. Thanks for everything to you and the entire crew at Corbin, and I really hope you enjoy the pictures. -Mak Happy beyond description
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.