Corbin's Gunfighter & Lady saddle for the Sprint gives your bike a valuable comfort boost. As you can see from the photos, our sculpted rider's position provides a much greater area of body contact for improved weight distribution. In fact, the seating area in the front portion provides over six inches of vertical body support! Naturally both seating areas provide a contour designed to fit the human body and eliminate hot spots for longer riding range.
For your copilot, we offer a removable passenger backrest that gives even more support and a feeling of security. The Corbin backrest is adjustable to provide a tailored fit to your passenger's posture. Installation of the backrest is a snap with a single setscrew locking it into place under the saddle. Once installed, the angle can be set without removing the backrest from the seat. We offer several backrest models that can work in this seat design, but recommend the #02-S shown. This model gives the best combination of looks and functionality on the Sprint.
Ergonomic sculpting provides a better fit to your body and improved weight distribution. Neutralized seating posture curbs the tendency to slide in the saddle, which helps to reduce rider fatigue. Inside, the seat is built up with our Comfort Cell® foam to provide a firm supportive ride mile after mile. To aid in ground reach, we've shaved the nose area of the seat narrower than the bucket to allow your legs clearance at stop signs. While riding, just slide back into the bucket for maximum support.
Corbin's seat and backrest combination is designed to install easily on your bike and fit perfectly to the tank and tail section. We include a stainless steel latch pin installed on the seat that integrates with the Triumph keylock. Your saddle will mount with a tongue in the front and the Triumph lock at the rear. Corbin backrest must be locked in with the safety screw before you install the saddle on the motorcycle.
Like all Corbin saddles, this model includes genuine leather seating panels for a truly luxurious ride. To tie in nicely with the design of the Triumph we recommend the cover materials shown here which is: Carbon-Fiber laminated leather seating and Asphalt sides with no welt. The asphalt side material shown here looks perfect with the trim pieces of the Sprint making a nice custom addition. Leather seating provides a perch that breathes with your body and will adapt with the foam shape during break in for a personalized fit. Over time, leather will mature to take on its own unique character, just be sure to care for it properly with a quality conditioner like our Saddle Cream.
For an added bit of luxury on those rides that start in the chilly morning hours, we offer the option of electric seat heaters. Built inside the saddle and controlled by a conveniently located switch on the left side of the seat. Just flip the switch and the proper heat level is maintained automatically. Heated seating really increases riding enjoyment when its cold out and is very simple to install. Wiring pigtail and complete instructions included.
To further customize the look of your new saddle, we offer a range of finishing plate options for the Ovalbac® series backrests. The model shown is covered in the same leather type as the saddle for an integrated look and features a leather look finishing plate on the rear. We also offer a carbon-fiber look model or a paintable one if you prefer. Either model finishing plate is included at no extra charge.
Our unique basepan material molds to every contour of the Sprint and fits close to the body grove for clean looks. We've carefully designed the pan to yeild favorable ergonomics and moved the nose clip to a lower position to allow more design latitude in the nose area. The Corbin pan not only fits perfect to the bike, but has the structural strength to support the Corbin backrest hardware for your passenger. Part of Corbin's patented manufacturing process!
If you're looking to add a little bit more storage to your Sprint, it doesn't get any more convenient than the Corbin Glovebox. Four liters of weather resistant, locking storage that bolts to the back of your Corbin backrest in place of a finishing plate. Fully lined and weather stripped to protect your cargo. For complete information check the Accessories tab or click HERE.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
PATENTED RUMBLE SEAT:
The most convenient saddle available! Converts instantly from
Solo to Dual with no tools required—just a simple flip of the
wrist. Another original Corbin idea, this seat design is so
unique it carries two United States Patents:
#4,953,911 & #6,971,714.
Click the button for
additional information.
CORBIN BACKREST SYSTEM:
The first and most versatile removable backrest system available
for motorcycles! Corbin's backrests provide added vertical back
support and long-range comfort. Supported by internal hardware
for a very clean look, the backrests adjust to the rider's profile
for a tailored fit and install or remove easily as desired.
A very popular option! Click the button for
additional information...
KEY LOCK INSTALLATION:
This saddle model uses a new mounting system designed by Corbin
to allow installation and removal with a simple key lock. Once
the included brackets are installed, the saddle can be removed
easily by simply inserting and turning the key.
Need a
demo?
Just click the button.
ELECTRIC HEAT:
As an option, we can include electric heat in this saddle!
This option provides a true bit of luxury for when the
temperature starts to drop. Installation is simple, with the
major components pre-built into the saddle. Just wire in the
included pigtail and you're ready to roll.
Click the button at left for
complete information...
Warning!
Heater elements should never be installed in motorcycle seats
used by riders who cannot sense heat.
MODULAR SEAT SYSTEM:
This component is part of Corbin's patented modular seat system
(US Patent #7,556,114). It is engineered to work in a variety of
configurations, providing maximum versatility on your motorcycle.
A typical modular seat system consists of a rider seat, passenger
seat, Smuggler trunk and Corbin backrest.
Click the button to see
how it all works.
VISUAL 3D CONFIGURATOR
Interactive Design Tool
#T-1050-GT-12
Gunfighter & Lady saddle no heater, 2010-2016 Triumph Sprint GT
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Rider seating: 13.5" wide x 16.5" long x 6.5" deep Rear area: 102" wide x 9.5" long Approx seat height: 32"
Mounts easily with latch pin preinstalled on the Corbin saddle that meshes with your stock key lock system. Simply slide the saddle into place nose first to engage the tongue and lower the rear into place. Push firmly on the passenger platform to latch and you're ready to hit the road.
NOTE: For improved ergonomics the tongue at the front of the Corbin saddle uses a lower position than the stock unit as shown in the photo above. Be sure to locate the nose clip properly to assure correct fit.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
Hi Corbin team. Just wanted to pass along how great this seat is. Every ride it seems to get more comfortable! I'll be in the market for a rider backrest and tour-pak pad this winter. Can't wait to add more Corbin comfort to the bike. -Bill L.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.