Corbin's saddle design greatly enhances the comfort of the Gixxer by ergonomically dispersing your weight over a greater area. Built up of Corbin's Comfort Cell® foam to provide miles and miles of supportive comfort for the sport touring enthusiast. Our exclusive foam material feels firm at first, but doesn't break down like the stock foam keeping your body supported indefinitely for day long riding enjoyment.
After an initial break-in period, Comfort Cell® foam will adapt to your body to provide an even greater degree of comfort and weight distribution. Additionally, the rider's seating position has been neutralized to reduce the tendency to slide towards the tank under braking. Notice also how the seat is shaped to provide support for your legs while your feet are on the footpegs, but is shaved in the nose area to allow good ground reach.
This bike also accepts a passenger saddle giving you coordinated copilot accommodations. We've built the rear seat up with our Comfort Cell foam to provide good resilience and designed a sculpted perch that provides good, neutralized seating for your copilot. This gives passenger comfort and helps to curb sliding in the saddle. Sorry, but due to space limitations, we were unable to engineer a removable backrest into this model.
All components are engineered to fit perfect to the tank, chassis and tail section, our front solo saddle will also work with the stock rear seat or cowling if you prefer. Manufactured with a fibertech basepan for unsurpassed fit, Corbin's GSXR seats ride on rubber bumpers to protect the motorcycle's paint job. To make installation easier our seats come ready to install with brackets pre-mounted on the saddle.
All Corbin saddles come standard with genuine leather seating inserts for a true touch of luxury. We've come up with a slick cover design that allows for custom or subtle looks depending on your preference. Above we show the front saddle decked out with Carbon-Fiber leather seating, Carbonium trim and Asphalt sides for contrast. Rear seat is made to match with the same materials.
Leather seating will provide a surface that breathes with your body and will adapt with the foam during break in for a perfectly personalized fit. Just be sure to care for it properly with a quality leather conditioner like our Saddle Cream to help it age gracefully and remain weather resistant.
Saddles install like stock. Rear seat includes bracket that integrates with Suzuki key lock system. Front saddle bolts on just like stock with brackets included and preinstalled on the saddle.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider Seating: 12.5" wide x 11" long Approx. Seat Height: 31.5" Passenger: 8.5" wide x 11" long
Front saddle installs just like stock with mounting brackets included and premounted on the Corbin saddle.
Rear seat installs easily and uses the stock Suzuki key lock system. Brackets are included that integrate with your Gixxer mechanism and come premounted on the seat as shown.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...the fit and quality of the product is simply amazing! Imagine my surprise when I got this beautiful seat mounted on my scoot. I hopped on right away and found that I could very nearly flat-foot the bike on both sides... -Cyndi S.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.