This is the setup for your next big adventure! Our Dual Sport design combines the functionality of a motocross seat with the comfort of ergonomic design. The Dual Purpose motorcycle has come a long way since the overweight, under-sprung, twin shock models of the seventies and rider demands have changed too. Today's Dual Sport rider is expected to tame terrain formerly reserved for only the most radical off-road machines. KTM is known for adapting their intense motocross machines for this purpose and we are proud to work with KTM USA to develop a saddle exclusively for KTM to fit the new 950 Adventure.
Here's how it works: The traditional Corbin saddle has a bucket shape that cradles you're posterior for maximum square inches of body contact, but we know that won't work when your blasting around off-road. You've gotta keep moving or you're going to unexpectedly part company with the bike, right? We took that same simple concept and applied it to a design that still allows you to move forward and over the tank to get through the corners (or back over the fender for skimming over the whoops). As your map leads you to the paved miles, you slide back into a wider more supportive area and soak up the highway miles in comfort... perhaps catching your wind from that last leg. Download Demo!
Any Dual Sport rider that's made it past the first checkpoint can tell you that foam density makes a difference: Too soft and you feel like you're bouncing off the basepan, too hard and you may as well be sitting on the fender. We use our exclusive Comfort Cell® foam to cast a shape that gives you the proper blend of resilience with long lasting support. Our ergonomic shape provides plenty of lateral support when you slide rearward and is sculpted narrower in the front for ground reach and mobility.
On top we use only the highest grade of weather resistant materials for durability and long life. You know we couldn't stop there, so we dressed it up in a faux Carbon-Fiber embossed vinyl that gives it a bit more flair. Cover is completely hand sewn and riveted to our rigid Fibertech basepan. Naturally, the material selection is completely up to you even is you just want a plain black saddle... we aim to please. Corbin's Dual Sport saddle installs like stock and rides on rubber bumpers to protect your bodywork and chassis.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
VISUAL 3D CONFIGURATOR
Interactive Design Tool
#955-010
Dual Sport saddle for KTM 950 / 990 Adventure
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Seating Area: 12" wide x 34.5" long Approx. seat height: 36.5"
Installs like stock with hardware pre-installed on the Corbin saddle. Latches with the original KTM key lock system.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
Raven and I did about 180 miles, and when we got home we both said, "Wow!" What a ride. So I figured I'd write and tell you, I think this is one hell of a seat, and Mama and I want to thank you for building these seats... -Eric & Raven
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Here's how it works: The traditional Corbin saddle has a bucket shape that cradles you're posterior for maximum square inches of body contact, but we know that won't work when your blasting around off-road. You've gotta keep moving or you're going to unexpectedly part company with the bike, right? We took that same simple concept and applied it to a design that still allows you to move forward and over the tank to get through the corners (or back over the fender for skimming over the whoops). As your map leads you to the paved miles, you slide back into a wider more supportive area and soak up the highway miles in comfort... perhaps catching your wind from that last leg. Download Demo! 
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.