Naturally, we set out to design a seat to fit the bike visually as well as improving the quality of your ride... Corbin's saddle does just that! Our high density Comfort Cell foam allows a sleek, low profile while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution and back support. This also helps to eliminate the centralized pressure felt from the stock seat.
Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a very clean look. This gives your passenger good mid-range comfort. Sorry folks, but the removable passenger backrest isn't available in this seat model... there's just nowhere to put the hardware for it safely.
Notice how close the Corbin saddle fits to the tank, sides and rear fender... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look on the motorcycle and adds to the custom appeal.
Covered using only the highest grade materials available. Shown in our standard setup using natural grain black vinyl in the seating and side panels with a tasteful cross-diamond stitch. Custom colors and combinations are also available by special order. Be sure to care for your saddle properly with a quality conditioner like our Saddle Cream. This will help the cover to remain supple and weather resistant while it matures gracefully.
Mounts to the motorcycle like the stock seat with the rear bracket being transferred from the OEM seat to the Corbin model. This is a simple procedure that requires just two bolts. Once the bracket is transferred, the Corbin one-piece saddle mounts to your bike with a tongue in the front and two bolts into your fender at the rear. Simple!
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider seating: 11.5" wide x 12.5" long Passenger: 9" wide x 10" long Approx seat height: 26.5"
Saddle mounts like stock with a tongue in the front and two bolts into your fender at the rear. Corbin saddle uses rear OEM seat bracket transferred from your stock seat.
OEM bracket transfers from stock seat onto the Corbin saddle with just two bolts. Mount Corbin saddle to bike re-using the two stock bolts through this bracket and into the fender in stock locations.
Due to the tight tolerances, it is easier to secure the rear bracket by lifting it up to roughly 1/2 inch above the fender and starting both screws. Once they are both started, let the seat come down to the fender and tighten securely.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
It couldn't look any better than it does now, and the level of quality and comfort leaves me wondering why the heck I waited so long before I bought the Corbin. I'm a Corbin customer for life... -John R.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.