Corbin provides incredible comfort gains for your new sportbike. In the front, we've leveled the rider's platform for a better seating posture that helps curb the tendency to slide towards the tank under braking. In the long run, this helps to eliminate fatigue on your wrists and knees. For added support, we've widened the seating area by almost four and a half inches which disperses your weight over a greater area, eliminating hot spots. The sculpted shape of the seating relieves pressure from your tailbone and supports your body more from the sides... you won't believe the difference this will make in your bike! For ground reach, the front saddle is slightly lower than stock and is rounded at the nose area.
For your passenger, we've created a seating area that has been widened by nearly two inches. Again, this increases the area of body contact for better weight distribution and longer range comfort. Our sculpted seating posture helps your passenger stay put in the seat rather than sliding forward into you. Corbin sacrificed a little bit of the seating length in order to provide for our much desired passenger backrest system. Our backrest installs easily into hardware built inside the saddle and locks in with a single set-screw under the seat. Of course, the Corbin backrest is adjustable to provide a tailored fit. Adjustment is easy, simply move the backrest to the desired angle and tighten the adjustment set-screw at the top of the mounting shaft. Comfort and security for your co-pilot! We offer several models of backrest to suit your taste, but mostly recommend the #02-S model shown here. Just click over to the Accessories tab to view all models.
The new Corbin Ovalbac passenger rest provides your bike with the hottest look available in passenger support. Naturally, it comes decorated to match the design of your saddle for a totally integrated look. We even offer different styles of rear finishing plates to complete the look. The standard plate design gives a look similar to leather grain or for the same money, we can provide a Carbon-Fiber look plate like the one shown on the bike above. An excellent value!
Of course, both saddles and backrest include genuine leather seating in your choice of colors and styles. Leather seating breathes with your body to provide a more luxurious ride and will break in along with the foam shape to conform to your personalized fit. In the saddle shown here we used our Carbon-Fiber leather seating with coordinating Carbon-Fiber look vinyl side panels (using vinyl in the sides helps to support the foam shape and keep the saddle looking sharp.) For a custom touch we added a Ninja Red welt.
All Corbin saddles are built up on our exclusive Comfort Cell® foam that provides a firm supportive ride. Nearly twice as dense as your stock foam, Corbin Comfort Cell® will support your body better and longer for more time in the saddle. Over time, the saddle will break in and take on your shape for a personalized fit. Corbin's rigid Fibertech baseplate supports the foam shape and keeps the carefully engineered ergonomics intact. Fits perfect to your chassis and bodywork for a truly custom touch. Mounting brackets come pre-installed on the saddle for easy installation (see below).
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
CORBIN BACKREST SYSTEM:
The first and most versatile removable backrest system available
for motorcycles! Corbin's backrests provide added vertical back
support and long-range comfort. Supported by internal hardware
for a very clean look, the backrests adjust to the rider's profile
for a tailored fit and install or remove easily as desired.
A very popular option! Click the button for
additional information...
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Rider seating: 14.5" wide x 13" deep Passenger: 9" wide x 10.5" deep Approx seat height: 31"
Installation: Front saddle mounts like stock with all hardware included and preinstalled on the seat. When installing, slide the rear seat brackets under the bodywork first, then lower the nose of the seat to align the front tongue. Slide the saddle forward to engage the tongue and secure the rear bracket with the stock bolts. Pull up the rear corners of the seat to access the bolts.
Rear saddle also installs like stock. We include the latching bracket on the seat and the seat attaches to your stock Honda hinge in the front. Just push down on the rear of the seat to engage the lock. System works the same with or without the Corbin backrest installed.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
Just a note to tell you how impressed I am with my Corbin seat on my '03 Volusia. I have had it for over a year and a half now and have put about 30,000 miles on it. The seat performs awesomely, and I wouldn't trade it for anything! -Ken E. Customer for Life
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.