Gunfighter Saddle for 2012 - 2017 Harley-Davidson Night Rod
* Click or Tap to Activate Item *
Comfort and style together in one package is what made the Corbin name famous worldwide. Delivering a quality product constructed of the finest materials available has made Corbin the number one manufacturer of motorcycle saddles for over forty years! Our Gunfighter saddle for the Night Rod is a perfect example of this combination of form and function.
Up front the seating area has been ergonomically designed to distribute body weight over a greater area. This provides long-range support and eliminates hot spots. Neutralized seating platform helps to hold your body in place and curbs sliding in the saddle. Bucket shaping gives an unprecedented amount of body support. Notice how it curves up at the back to provide support to your lower back. Towards the front of the bucket we design the saddle narrower to allow for ground reach.
Passenger area is built to look good on the bike and flow with the fender. We use our high density Comfort Cell foam to provide reasonable comfort despite the low profile. There was not enough room under the saddle to work in support for the Corbin removable backrest.
Inside, our exclusive Comfort Cell foam material provides a firm ride that supports your body indefinitely. Comfort Cell is a closed cell foam type which means it remains resilient and won't mash down as you spend time in the saddle. Over time, Comfort Cell will break in and adapt to provide a personalized fit to your body.
Our Fibertech base material and patented manufacturing process allows a perfect fit to the lines of the fender and tank. This rigid baseplate provides the saddle with a firm foundation to support the carefully designed ergonomics of the foam. The entire seat rides on rubber bumpers to protect your paint job and mounts to your bike using a built in key-lock system that integrated with the HD hinge. All required brackets and hardware are included.
On the outside we use genuine leather seating for a luxurious ride that breathes with your body. Leather will break in along with the foam to support the personalized fit. We've designed a cover pattern that allows you to keep a custom, yet subtle look or choose from a variety of colored material options at no extra charge for high visual impact. Shown here with Natural Black leather seating and Asphalt sides. Corbin's custom stitch pattern is included for a nice subtle custom touch.
Installation is easy and requires only common hand tools. Our locking bracket installs onto the chassis using stock bolt locations. Seat bracket provides the lock pin and hinge pins that integrate with your HD chassis. Includes seat keeper cable.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider Seating: Approx. 14.5" wide x 14" long x 6" deep Passenger: 9.5"w x 10" long
Installation: Corbin's saddle is designed to work with the stock hinge system. Key lock bracket installs onto stock bolt locations on your chassis with simple hand tools.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...the seat looks great! Nothing like real leather and a solid frame underneath. Nice leather work, and that shows right off. I may pick up a passenger rest before next summer, once I decide which style and whether I want the one with the storage compartment... -Joseph T.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.