Dual Touring Saddle for 2006 H-D Screaming Eagle V-Rod
* Click or Tap to Activate Item *
Touring comfort probably wasn't at the top of your list when you got your CVO V-Rod was it? Fortunately, Corbin has designed a seating solution to provide exactly that. Our deep, supportive bucket is dished out to fit your body's shape to eliminate hot spots and pressure points. This also creates more square inches of body contact for increased weight distribution. Add another nine inches of vertical back support via the Corbin removable backrest and you'll be ready to take on the baggers.
Naturally we thought about your copilot too. Notice how we've built a shape that fits up perfectly to the V-Rod fender, then flares out to provide wider seating. The flowing shape of the seat tapers back to fender width towards the rear to keep nice visuals. Of course we've ergonomically dished the seating platform here to give your passenger better weight distribution and eliminate centralized pressure. The Corbin backrest works here as well... and since it is fully adjustable, you can order a single backrest that you transfer back and forth or get two for full time use.
Corbin backrests are available in different styles to suit your taste and are fully adjustable to provide tailored support. For the best combination of form and function we recommend the Ovalbac model #02-S as shown here. The Ovalbac backrest is sculpted to fit your body shape and also features finishing plate options for a bit more custom look. Comes standard with an ABS plate in either a leather or carbon-fiber look. For just a little extra we can provide one painted gloss black or a chromed steel model that goes nicely with the other chrome bits on your V-Rod.
Corbin’s Dual Tour saddle comes in two pieces so it mounts like the stock seat and hinges to provide access to your fuel tank. Our front saddle will work with your stock rear if you wish, but it was not specifically designed to do so. As such, it does not really look appropriate (in our humble opinions). Virtually all orders for the front seat eventually call to get the rear seat as well.. just letting you know ahead of time so you don't get mad at us.
We build up the saddles and backrest with our exclusive Comfort Cell® foam for a firm supportive ride that lasts. Genuine leather seating is inlcuded in your choice of styles (standard black leather shown). Leather provides a nice breathable perch that will break in with your foam shape for a personalized fit. Color coordinated welts are available if you desire a more personalized look.
Remember, leather has very unique characteristics that help it remain the finest material known for building comfortable saddles. Leather is a treated organic material that will breathe with your body and adapt to your body shape. Leather actually works with your body by stretching, reconforming and enriching comfort. Leather saddles will start to show their own character with time and use. You can help your leather saddle by treating and protecting with Corbin Saddle Cream when cleaning your motorcycle. Your Corbin leather saddle will serve you best when cared for properly.
Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac model backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black. Go HERE for complete info.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
CORBIN BACKREST SYSTEM:
The first and most versatile removable backrest system available
for motorcycles! Corbin's backrests provide added vertical back
support and long-range comfort. Supported by internal hardware
for a very clean look, the backrests adjust to the rider's profile
for a tailored fit and install or remove easily as desired.
A very popular option! Click the button for
additional information...
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Seating: 13" wide x 16" long x 13" deep Passenger: 10.5" wide x 10" long
Installation:
Corbin saddles mount like stock with hardware pre-installed on the saddle. Remember to turn the key and gently latch the front seat as recommended by Harley-Davidson. Slamming the seat down to latch it could result in a broken tab. You will need to transfer the seat cable onto the Corbin seat from the stock one.
Pillion installation: Remove the stock rear seat from your bike according to your owners manual. Corbin's pillion seat slips onto the rear fender bracket like stock and is bolted down under the front solo using the original bolt. That's it, you're done.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...I am truly impressed with the quality of your product and highly recommend that all '08 TE Husqvarna owners toss that plank they call a stock seat. Thank you so much for making riding so pleasurable. -Matt H.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.