Widowmaker Saddle for 2025-2026 Buell Super Cruiser
* Click or Tap to Activate Item *
We've taken the concept of the solo design Wall saddle and created a two-up version we call the Widowmaker. Featuring over four inches of vertical back support in the rider's area that is perfect for hot rodded bikes while keeping a low profile with an option for an additional rider backrest. Perfect when a less reclined posture is desired.
Widowmaker seats you in the sweet spot on the bike for a more integrated feel while offering a sleek, flowing appearance that makes this design popular for 'round town cruising. Features a sculpted driver's position with a clean pillion seating area providing a flawless profile.
This saddle disperses rider's weight ergonomically and gives you lasting support while still providing good ground reach at stop signs! Our Widowmaker saddle provides seating one inch lower than the stock unit with a nose that is cut narrow for your leg clearance. This is an excellent choice for riders that often ride solo or have passengers along for short to medium range trips.
The Corbin saddle eliminates hot spots and increases your riding time... even with such a low profile. Passenger seating area is built to keep a slick look, but the use of our high-density Comfort Cell foam still provides comfort and support. Designed to accept a Corbin removable passenger backrest for added support and comfort.
Corbin backrests are available in a range of styles (#BR shown) and install easily with a single bolt. Once installed, your passenger will enjoy a total of nine inches of vertical support that easily adjusts to their riding posture.
All components include genuine leather seating panels and a wide range of custom options included at no extra charge. Design your saddle for a look uniquely yours.
Shown above:
Black Natural Grain Leather seating panels, Charcoal Alcantara trim, Matte Black stud bands, Trexx Gear side panel, Brushed Aluminum welt, Silver stitching, Silver assembly stitching and Silver Corbin Diablo logo.
NOTE: If you would like to diminish (hide) the appearance of the assembly stitching, choose "Coordinate" on checkout and we will use a thinner thread that coordinates with the material being sewn so it blends in.
Widowmaker saddle is available with the option of electric heated seating for a bit of luxury on those chilly morning rides. All components are fully contained in the saddle so you just integrate the included pigtail with your bike's wiring and enjoy heated seating with a flip of the switch on the left side of the saddle (front seating position only).
Corbin saddles are legendary for their tight, integrated fit to the bike and this model is no exception. Installs easily with a tongue in the front and a single bolt into your fender at the rear. For a clean, tool-free installation, use one of our stainless steel thumbscrews in this location. They are available in a variety of thread sizes for various applications. Your Buell uses an m8 thread so order part #ACST-8M.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Rider Seating: 12" wide x 16" long x 4.5" deep Passenger: 9" wide x 9.5" long
Mounts easily with a tongue in the front and a single screw into your fender at the rear.
Rider seating is one inch lower than the OEM unit and provides a narrower nose to allow better ground reach.
If you order the heated saddle, all components will be built into the saddle and you will simply have to plug the Corbin adapter pigtail into the heated seat plug on your Buell.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
Thanks for the prompt delivery. Wow, are these seats fantastic. They drip with quality and look absolutely beautiful. I can't wait to put them on my bikes and try them out. I ride more than 20,000 miles a year, so they'll get a good workout. -Curt M.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.