Corbin's touring package provides comfort worthy of this long legged machine. Ergonomically designed seating gives better weight distribution for miles of comfort. Neutralized platforms curb the tendency to slide in the saddle to reduce fatigue and increase your riding range.
Both front and rear saddles work with our removable backrest system. Corbin backrests install easily into hardware concealed inside the saddle and lock in with a single bolt. Naturally they're adjustable to provide a tailored fit to your profile. Since they're so easy to use, you can order a single backrest and transfer it front to rear as needed or get two for full time use. Corbin backrests are available in a variety of styles to suit your taste.
All components are built up with our exclusive Comort Cell foam for a firm, supportive ride that lasts. Combined with the sculpted shaping of the seats, our foam will support you in comfort for miles of enjoyment. Over time, Comfort Cell will break in and actually begin to take on your shape for a personalized fit.
Saddles and backrests include genuine leather seating in your choice of colors and styles. Leather provides a perch that breathes with your body for a luxurious ride. Leather is extremely durable and will adapt with the foam to conform to the personalized shape. Just be sure to care for it properly with a good leather conditioner like our Saddle Cream.
Corbin's RT saddle setup is available with the option of electric seat heaters. This luxurious option comes fully integrated into the saddle for simple use and is activated with a switch located on the side of the saddle. Just integrate the wiring pigtail with your BMW harness and enjoy the warmth. When flipped on, heat is controlled and maintained automatically via the built in controller.
Designed to fit perfectly and look custom made for your RT. Corbin's saddle components work equally well with or without the BMW saddlebags mounted on the machine. Front saddle adjustability is retained and works in any of the three positions.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
CORBIN BACKREST SYSTEM:
The first and most versatile removable backrest system available
for motorcycles! Corbin's backrests provide added vertical back
support and long-range comfort. Supported by internal hardware
for a very clean look, the backrests adjust to the rider's profile
for a tailored fit and install or remove easily as desired.
A very popular option! Click the button for
additional information...
ELECTRIC HEAT:
As an option, we can include electric heat in this saddle!
This option provides a true bit of luxury for when the
temperature starts to drop. Installation is simple, with the
major components pre-built into the saddle. Just wire in the
included pigtail and you're ready to roll.
Click the button at left for
complete information...
Warning!
Heater elements should never be installed in motorcycle seats
used by riders who cannot sense heat.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Rider Seating: 15" wide x 15.5" long Passenger: 14" wide x 9" long
Installation Instructions:
Front and Rear Saddles - Page 1
Front and Rear Heater - Page 1
Simple installation, Corbin components install just like stock with all hardware in place on the saddle. Although the system appears different, it works just like your stock seat.
Due to the seats ability to sit in either of the three height positions, when used in the lowest position, it will leave a small gap between the nose of the saddle and the tank. This was necessary in order to improve the ergonomic shaping of the saddle.
On this saddle model, the heater switch is located on the RIGHT side of the motorcycle.
In some cases getting seat to lock in the high position can be a challenge until the rubber bumpers break in a little. To ease this while the seat is new, you can shim up the rear mounting tab on the front seat with a couple of washers. This will allow the rear seat to move forward easier and lock into place
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...All I can say is holy crap! The pictures on your site do not do them justice. They are the most beautiful bags I have ever owned. My God, you guys did a great job on these. I guess the saying, "You get what you pay for," is true. Thanks for a great product. -Craig B.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount. 