Hollywood Solo saddle gives your Warrior a slick, low profile look while providing you with boulevard cruising comfort. Our Fibertech basepan provides a perfect, flowing fit along the tank, chassis and fender, but rides on rubber bumpers to protect your paint job. For two-up cruising we also offer a coordinated passenger pillion pad. Naturally, both pieces are built up with high density Comfort Cell® foam to provide a firm resilient ride despite the incredibly low profile. Itís seats like these that brought Mike to the development of our infinite ratio foam!
Hollywood Solo is a great setup if you want your Warrior to have a low and slammed look. Notice how the shaping matches perfectly to the tank and fender... this kind of fit is available only in a Corbin saddle. Our rigid Fibertech basepan provides a good foundation for the foam shape and is carefully designed to fit close to the chassis. Our exclusive Comfort Cell® foam is engineered with an ergonomic shape that provides a greater area of body contact for better weight distribution and maximum comfort. Sculpted shaping in the nose area assures you still have good ground reach at stop signs.
If you prefer a solo look or just want to show off that rear fender and snazzy paint job, you can run our Hollywood Solo without the pillion pad. This is a very clean look, but remember, you will have to remove a couple of brackets from the rear fender. Filling the screw holes with a nice chrome button head screw (not included) is a nice way to keep things looking clean. Corbin pillion pad bolts up to the solo with just two bolts and the whole assembly mounts using the stock key lock, so changing back and forth when desired is a simple procedure.
Our passenger seat is also built up with high density foam to give your copilot a surprising amount of support for such a slim profile. As with all Corbin saddles, both the Hollywood Solo and Pillion come standard with genuine leather seating a choice of colors and styles. On this page we show both decked out in Black Faux-Ostrich for a little custom appeal, but plain black is also available for a more subtle look. Leather seating is great for motorcycle saddles because it breathes with your body and will break in with the foam shape for a personalized fit.
Leather is extremely durable and works great for motorcycle saddles. Corbin has well over three decades of experience in motorcycle seat design and have found this to be the best material choice. (Just one of the many reasons you'll want to INSIST on a genuine Corbin saddle!) Over time your leather saddle will age and develop a unique character just like your leather jacket and boots do. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years. This will also help it to remain weather resist and conform to the shape of the foam during break in.
Foam density is an important factor in long range comfort (especially in low profile models like this one) and we always say... "Firm is a good thing". Corbin uses a very unique formula of purpose built materials in our manufacturing process. Combine this with over three and a half decades of design experience and you have what is commonly considered the World's Finest Motorcycle Seat. Comfort Cell® foam combined with our patented molding process deliver unmatched contoured support. Corbin saddles feel firm when you first ride on them, but will break in and adapt to your body and support you in comfort for years to come. Enjoy the ride on an authentic Corbin saddle!
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Rider Seating: 14" wide x 16" long Passenger: 8.5" wide x 13" long
Installation is simple and uses the stock Yamaha key lock system. Two bracket sets will be included with the saddle. One set is designed to mount saddles on the 2002 - 2003 models, the other is designed for the 2004 - 2007 models. The Hollywood Solo saddle mounts like stock on your key lock with latching bracket included. Pillion pad installs like stock with a tongue in the rear and two bolts into stock locations under the solo saddle.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.
Hollywood Solo, 2002 - 2003 Models
Hollywood Solo, 2004 - 2009 Models
Hollywood Pillion, 2004 - 2009 Models
Select Cover Options Below & Add to Cart
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.