Gunfighter & Lady saddle for 2004 - 2006 Yamaha FZ 600
Click or Tap to Activate Item
Engineered to provide the perfect blend of rider comfort and Corbin's awesome styling. Our Gunfighter & lady seat provides total comfort for you and a passenger on the Fazer. The sculpted riding positions disperse body weight across a greater area so you enjoy mile after mile of comfort. Neutralized seating platform curbs the tendency to slide towards the tank under braking which will help to reduce fatigue. And, of course, it looks excellent by itself or combined with a seat cowling.
For even greater passenger comfort, the Gunfighter & Lady accepts the removable backrest which is adjustable to provide a tailored fit to your co-pilot's posture. Simple to install with just a single bolt, the Corbin backrest is the most refined system available for your bike. Designed specially to support your passenger for the long haul and provide a nice feeling of security. Available in a range of styles to suit your taste (#02-S shown). Our Ovalbac models, like the one shown, even have rear finishing plate options for a more custom touch.
Corbin's patented molding and manufacturing process provides a precision fit to the tank and tail section while the whole saddle rides on rubber bumpers to protect the bike's paint. We designed this seat to work with the seat cowling for the radical solo look as well. Inside, we use our exclusive Comfort Cell foam for firm support that lasts. Notice the nice clean, sporty profile of the Corbin saddle yet it still provides sport touring class comfort and ergonomic support.
Leather seating panels are included along with a wide range of color and material options. Leather gives you an excellent seating surface that breathes with your body and will conform with the foam shape during break in for a personalized fit to your posterior. Be sure to care for it with a quality conditioner like our Saddle Cream. This will help it to remain weather resistant, stay supple and be your favorite accessory for years to come.
Our exclusive Carbon Fiber style Leather adds an exciting, sportbike touch to your FZ. To complete the look, we've used Carbon-Fiber embossed vinyl side panels. We use vinyl in the side panels to support the foam shape and keep your saddle looking sharp longer. Choose any welt color at no additional charge for a custom look tailored to your machine.
Backrest hardware is included and built inside the saddle so there's no brackets to clutter up the look of the machine. This saddle works with our new Ovalbac design backrests for ultimate comfort and very cool looks. The #02-S model backrest (shown) comes coordinated to your saddle and even has removable rear finishing plates that offer further custom options. Shown here we used an ABS Carbon-Fiber look but we also offer one with an Aluminum look or a leather look. For just a little extra, we can supply one painted gloss black or even chromed steel!
If you're looking to add a little storage space to your Fazer, how 'bout this cool new glovebox for the rear of your Ovalbac backrest (#02-S only). Designed to carry four liters of your essential stuff like cell phones, spare gloves, bottled water, maps and sunglasses. Constructed of durable ABS and painted gloss black for a perfect finish. You can leave this mounted on your backrest full time or swap it with a regular finishing plate as needed. Installation is just two screws! Comes fully lined and weather stripped with two keys. Click on over to the Glovebox page to learn more HERE.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Rider Seating: 12"wide x 13" long Passenger: 10" wide x 9" long
Installation: Our Gunfighter & Lady saddle installs like stock on your YZF using a tongue in the front and your existing key lock system. Latch bracket is included and comes preinstalled on the saddle. Corbin backrest installs into built in hardware and locks in with a single bolt.
If you opt for the Yamaha seat cowling, you will install a bracket on your bike that sticks out from under the saddle as shown here. This bracket comes from Yamaha with the seat cowling. Just slide the cowling into place and secure with the stock screws into this bracket as directed.
Until the rubber bumpers break in, it may be difficult to get the saddle to latch. To ease mounting, washers can be placed between the seat pan and lock catch allowing it to reach the lock easier. Once the bumpers relax a little, these washers can be removed.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Gunfighter & Lady, 2004 - 2006 Yamaha FZ 600
Ovalbac Leather Backrest (ea)
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.