The Young Guns saddle design gives your Rocket a low slammed look with plenty of comfort for you and a precision fit to your bike. Our high density Comfort Cell® foam provides resilient comfort and a low seating platform for a slim profile that looks awesome. Notice how the shape of the saddle follows the contours of your bike and molds along the crown and profile of the Triumph fender... fit like this comes only in a Corbin saddle. Young Guns tail section is padded and upholstered so it can take passengers for a short distance, but this model is designed primarily as a solo saddle.
In the front, we've built a seating platform that is concave in shape to fit the contour of your body and provide more square inches of body contact. This gives you excellent comfort despite the low profile design. On top, we cover the saddle with genuine leather for a truly luxurious ride. In this image we show two models that offer distinctly different looks on your Rocket III. One features Black Faux Alligator seating with Faux Ostrich sides and a Faux Snakeskin tail while the other one gives a totally stealthy look done up in all smooth black.
You can see here how Corbin integrates an ergonomically sculpted bucket that provides excellent weight dispersion and good support. Ergonomic shaping means the saddle is shaped like your body to help eliminate hot spots and centralized pressure, thus creating long range comfort. Sculpted with a narrow nose for good ground reach while providing support under your thighs while in the riding position... a standard of Corbin design. Our seating sits you down into the bike into the sweet spot which gives you a better feeling of control and allows for lower back support. As you can see here, this model provides over six inches of vertical support!
Our V-Tail pattern on the tail section adds to the fast look of the saddle and integrates nicely with the visual appeal of the Rocket III. Inside, our exclusive Comfort Cell® foam gives you firm support that lasts all day because it doesn't crush down like the soft stock foam. Over time, Comfort Cell® will adapt to your body and provide a personalized fit. Under the foam, our rigid Fibertech basepan fits perfectly to your bike and provides a good foundation to keep the foam shape correct. Corbin basepans ride on rubber bumpers to protect your paint job from scratching. Installation of the Young Guns saddle is simple and works on your key lock just like the stock unit.
Choose from a wide range of leather styles for a truly custom touch. Leather seating is perfect for motorcycle saddles because it breathes with your body and will conform with the foam shape for a personalized fit after break in. Over time your saddle will age and develop a unique character just like your leather jacket. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years. Never use cleaners or conditioners that contain petroleum or kerosene as they will damage the hide and reduce its life span.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
Rider Seating: Approx. 13.5" wide x 17" long Approx. Seat height: 27"
Installation: Corbin's Young Guns saddle uses two installation points just like the stock front saddle. Shown at the arrows in this image, there is a tongue in the front that clips under a bracket on your frame and a latch pin that integrates with your stock key lock system. Both come pre-mounted on the saddle for quick and simple installation.
To install the saddle, simply slide the nose tongue under the bracket located near the tank on your Rocket. Align the saddle's latch pin with the key lock on your bike and lock it into place. Notice the Corbin latch pin is a DOUBLE latch, so you should listen for a double click and you latch it in place. If you can pull the seat up from the bike, the latch is not engaged completely. Usually a smack with the ball of your hand down into the seating area over the latch pin will solve this.
To ease installation until the rubber bumper on the basepan break in, it may be necessary to add a washer between the Corbin basepan and latch pin.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
2360 Technology Parkway Hollister, CA 95023 800-538-7035
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Young Guns saddle, 2004 - 2014 Triumph Rocket III
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
Warning! Heater elements (when available) should never be installed in motorcycle seats used by riders that cannot sense heat.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.