You asked for it, you got it! We've had a lot of requests for a Rocket III fairing with a more traditional look. The result of that is the Fleetliner fairing you see above. Designed to fit all Rocket III models and provide excellent wind protection and an old school look. Comes prepainted and color matched to your Triumph paint so it's ready for immediate installation.

Subtle details like the center rib and sculpted line of the wings add to the visual appeal. Crafted to work with the air flow to provide more stability to the front end while relieving rider fatigue. Another example of form and function expertly combined in Corbin fashion.

We've taken a shape similar to the fairing designs you've seen on cruiser models before, but improved the design to provide better areodynamics. Notice how the shape of the fairing starts at the headlights and flows back to part the wind more gracefully. This transfers the highest pressure area rearward of the steering pin which gives much greater stability at speed (a rudder effect). This shape also brings the slipstream "bubble" further back to get you out of the wind.

As the fairing is designed to slip through the wind, it creates less turbulence and buffeting which gives you a quieter and smoother ride than the standard plexi windshield. Naturally this stability and low pressure slipstream for the rider helps to relieve fatigue associated with long days on the highway. It also helps to lower wind noise which adds to the comfort value.

Constructed of our Fibertech material for a smooth clean finish and durability. Fleetliner fairing is available in either solid color or two-tone paint schemes to coordinate with your stock Triumph paint.

Topped off with a smoked windscreen for a beautiful piece that is ready to install right out of the box. Speaking of the windscreen, our fairing will actually work with just about any windscreen or wind deflector designed for the 1997-2006 Harley-Davidson FLHTC model fairings. This will allow you to easily customize the performance to your stature. A local Harley dealer can show you a selection of H-D and aftermarket models or just run with the cool dark-smoke model that we include. If you are a taller rider and prefer a little more wind protection, we also offer a 10" clear windscreen in place of the smaller smoked one, just select the appropriate windscreen in the space provided.

Simple to install with complete directions and all required brackets included. To assure a perfect look on your bike, brackets come painted to coordinate with bike and give a subtle appearance. Installation can be accomplished by an average weekend mechanic. If you opt for dealer installation, it will most likely be only 1/2 hour of shop time.



For Part Numbers, Pricing and Options, Please click on the ORDER tab.

Fibertech Construction	Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
Finish	We use a quality gel-coat for a nice finish that doesn't show material weave. When ordering parts in "primer gel-coat" you can expect a part ready for your painter's preparation. Most Corbin components are also available prepainted and ready for immediate installation.

Installation:	#T-R-3-FAIR-FLT
	Simple installation with complete instructions and all required brackets included. Brackets are chrome plated.
	The Corbin fairing was designed on a stock configuration motorcycle. If you plan on changing handlebars on your bike, this may impact functionality to some degree. Rivco risers: Our top mounting bracket does not fit between the risers. If you want to use these, you will need to slightly modify the Corbin bracket with a grinder or file.
	The Fleetliner Fairing will fit with the Triumph bar risers and on all models of the Rocket including the Rocket III Classic.
	Our fairing does NOT work with the Triumph driving lights (#A9738042) unless they are relocated.
	If you have a handlebar mounted radio or other device installed, it may effect fit of the Corbin fairing.
	Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.

* Click the Product Image to Learn More *

Saddle Cream Take good care of your new seat and it will take care of you! Perfect for all your leather goods. $25
Windscreens	Sure, you can order any of the windscreens we have premounted on your fairing, but if you've changed your mind and want to try a different one, you'll find them here. *Check 'em out...*

Testimonials:
Comments?	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
Submit Photos:	Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!
General Contacts	California Factory: Corbin Saddles 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Florida Showroom: Corbin Saddles 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 E-Mail General Mailbox

	ITEM	DESCRIPTION	WINDSCREEN	PRICE
	#T-R-3-FAIR-FLT	Fleetliner Fairing, Single Color Triumph Rocket III	Select Windscreen 5" Smoke screen 10" Clear screen	$2180
	#T-R-3-FAIR-FLTB	Fleetliner Fairing, Two-Tone / Tribal paint Triumph Rocket III	Select Windscreen 5" Smoke screen 10" Clear screen	$2678
	We do not always have a color match for all brands and model. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
	Model Year
	Paint Color
		Enter Special Instructions Below
Please be sure to select/enter all options, if applicable, before clicking the "Add To Cart" button.

       

NOTE: Corbin products are designed to fit very close for cleanest look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you. Corbin Accessories should never be used with missing or damaged hardware as this can create an unsafe situation for rider &/or passengers.

MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.

CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.

SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, PLEASE READ

EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.