The truly hot setup for your Dual Sport bike! Our saddle design combines the functionality of a motocross seat with the comfort of ergonomic Corbin design. The KTM EXC series is more than a stone's throw in design from it's overweight twin shock counterparts from the 1970's. Here's a street legal motorcycle that rides like a true dirt bike... Naturally, you'll want your accessories to perform to those same standards. Our Dual Sport saddle does just that by providing aggressive riding characteristics with comfortable ergos for those moments of smooth clear pavement.
Today's Dual Sport ride expects you to overcome terrain formerly reserved for only the most radical off-road machines. KTM is well known for adapting their intense motocross machines for this purpose just as well as Corbin is known for creating comfort. We know you have to keep your body moving if you don't want to unexpectedly part company with your bike so the shape provides free movement from rear fender to tank. Notice how you'll be able to slide all the way up the tank to coax your bike through that sandy corner or unhindered all the way back to the fender and skim over the whoops.
As your map leads you to the paved miles, just slide back toward the rear of the seat for a sculpted bucket shape. This dished shaping creates more square inches of body contact for added support and elimination of hot sport. Have a seat and soak up your highway miles in comfort while you catch your breath from that last leg of the event. The Corbin saddle also works excellent if you plan on throwing some street tires on your bike and making a Super Motard, hooligan commuter!
Any Dual Sport rider that's made it past the first checkpoint can tell you that foam density makes a difference: Too soft and you feel like you're bouncing off the basepan, too hard and you may as well be sitting on the fender. We use our exclusive Comfort Cell® foam to cast a shape that gives you the proper blend of resilience with long lasting support. Our ergonomic shape provides plenty of lateral support when you slide rearward and is sculpted narrower in the front for ground reach and mobility.
On top we use only the highest grade of weather resistant materials for durability and long life. You know we couldn't stop there, so we dressed it up in a Carbon-Fiber embossed vinyl seating that gives it a bit more flair with our new Asphalt side panels for grip. Cover is completely hand sewn and riveted to our rigid Fibertech basepan. Naturally, the material selection is completely up to you even is you just want a plain black saddle... we aim to please. Corbin's Dual Sport saddle installs with a single bolt and rides on rubber bumpers to protect your bodywork and chassis.
Inside we use our high density Comfort Cell® foam for firm support that won't break down while you're riding. Comfort cell® is one of the critical elements to Corbin's legendary saddle comfort. To learn more about the design and technology behind the original Corbin saddle, just click on the logo at left. This animation gives a graphic representation of how the Corbin saddle is designed to function compared to your stock seat. Over 36 years of saddle making experience goes into the production of the Corbin seat and we carefully choose the specialty materials used in their manufacture.
Please note, we tooled up our basepan on a bike that already had a Baja Designs dual sport kit in place and we left room for battery and such. We have not been able to test our saddle with ALL available aftermarket accessories or Dual Sport kits.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
Seating Area: 8.5" wide x 27" long Approx. seat height: 36.5" unloaded
Works with IMS gas tank.
Installs easily with a tongue in the front and a single bolt into the saddle from under the fender. Be sure to tighten securely to assure saddle does not work loose accidentally. We recommend 7 - 8 ft lbs.
NOTE: This saddle fits the following KTM models: 2003: 200, 250 & 400 SX 2004 - 2005: 250, 400, 450, 520/525 EXC 2005 - 2006: 450, 525 SX
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Dual Sport saddle, KTM SX & EXC
Select Cover Options Below & Add to Cart
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.