Our two-piece saddle design greatly enhances the comfort of the Z1000 or Z750 by ergonomically dispersing your weight over a greater area to eliminate hot spots. Built up of Corbin's Comfort Cell® foam to provide miles and miles of supportive comfort for the sport-touring enthusiast. Additionally, the rider's seating position has been neutralized to reduce the tendency to slide towards the tank under braking. The front seat is shaped to provide support for your legs while your feet are on the footpegs, but is shaved in the nose area to allow good ground reach. Our pilot saddle works equally well with the Kawasaki seat cowl or rear seat.
We also make a generously shaped passenger seat for your copilot. Again, we've designed the saddle for maximum body contact area and have neutralized the seating so your passenger won't keep sliding into you. Built up with the same high-density foam as the front seat, we give your copilot comfort for the long haul. Due to space limitations in the stock bodywork, we were unable to provide for the use of a passenger backrest on this seat... sorry.
Engineered to fit perfectly to the tank, chassis and tail section, our front solo saddle will also work with the stock Kawasaki rear seat. Our saddles are manufactured with a Fibertech basepan for unsurpassed fit, Corbin's pilot and passenger seats ride on rubber bumpers to protect the motorcycle's paint job.
All Corbin saddles come standard with genuine leather seating inserts for a true touch of luxury. For the Z1000 or Z750, we recommend our Carbon Fiber laminated leather seating with coordinating vinyl sides and color coordinated welting if desired. On the model shown here, we've used a Ninja red welt to coordinate with the tank logo on the black bike... choose any color you feel appropriate to your machine. Leather seating will provide a surface that breathes with your body and will adapt with the foam during break in for a personalized fit. Just be sure to care for it properly with a quality leather conditioner to help it age gracefully and remain weather resistant.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
Rider seating: 12" wide x 12.5" long Seat Height: 31" approx. Passenger: 10" wide x 9.5" long
To make installation easier our front and rear seats come ready to install with brackets pre-mounted on the saddles. Installation procedure is similar to stock for ease of use.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Select Cover Options Below & Add to Cart
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.