Corbin engineering visually keyed to the big Kawasaki! Featuring nearly 70 liters of storage... enough to hold TWO full face street helmets with some room to spare. Fully lockable with a lined interior and color matched exterior, the Corbin Trunk Box takes form and function to a new level.
On the outside, we take our design cues from the motorcycle's fairing and bodywork so the trunk looks like an extension of the factory bodywork. This provides a very clean look and disguises the large storage capacity. Hand painted and finished to coordinate with OEM paint colors. Integrates with factory rack supports for simple installation.
At the rear, we've built in auxiliary LED lighting for added visibility and safety. Corbin trunk includes a wiring pigtail that splices into stock electrical harness behind the passenger seat. Quick disconnect is provided to allow for simple removal and reinstallation as desired. Lighting provides additional running lights, brake light and turn signals.
Includes passenger backrest pad and armrests covered in genuine leather. Built up of the same Comfort Cell foam as our world famous saddles to provide firm, resilient support. Ergonomic design gives a sculpted fit to the body for maximum contact area and good weight distribution. Tasteful stitch pattern adds a nice custom touch. We will glady coordinate the trunk components to your existing Corbin saddle (if equipped).
Corbin's trunk comes fully lined, weather stripped and with a locking door to protect your cargo. As we mentioned above, the 68.5 liters (2.5 cubic feet) is enough space to keep two full face helmets with some room to spare. Remember though, we have designed the trunk to work with the average full face street helmet. As such, the longer chin bar used on dirt helmets will likely not fit well.
A note about trunk loading: Our trunk box is constructed of Fibertech material which is extremely durable and strong. However, it is NOT a good idea to load heavy items in a motorcycle trunk. By nature, trunks ride too high and too far rearward to handle weight properly. As such, you should reserve this space for lighter, bulky items like helmets, rain suits and laptops. Although it will withstand greater weights, we recommend a maximum load of 20 pounds.
Installation is fairly simple and suitable for the average weekend mechanic. We provide a wiring pigtail that splices into the Kawasaki harness and passes through a space in the rear painted cover under the stock luggage rack. For mounting, just remove the stock black luggage rack and bolt the Corbin trunk directly to the Kawasaki rack supports. Simple and strong!
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
We use a quality gel-coat for a nice finish that doesn't show material weave. When ordering parts in "primer gel-coat" you can expect a part ready for your painter's preparation. Most Corbin components are also available prepainted and ready for immediate installation.
Corbin trunkbox comes fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the door keeps out the elements. Locking door keep contents secure.
Passenger backrest pad and armrests include genuine leather panels for a luxurious feel. Comes standard in natural grain black leather with custom options available at no extra charge.
Capacity: 68.5 liters (2.5 cubic feet) Dimensions: 26" wide x 22" long x 12.5" tall
For Corbin trunk installation, you will be removing the stock black plastic luggage rack insert (just four bolts).
Included wiring pigtail routes under stock luggage rack and behind the small painted cover (no drilling required). Quick splice connectors are included to integrate the Corbin pigtail with your Concours wiring harness. Trunk plugs into quick detach pigtail for simple removal and reinstallation of trunk.
Once the black insert is removed, the Corbin trunk bolts directly to the stock Kawasaki luggage rack supports. This provides excellent strength and support. Use the included flat head screws and "removable" Loctite to secure.
Loading Guidelines: It is not recommended to load a trunk heavily as it is carried too high and too far rearward to balance efficiently. Reserve trunk space for light, bulky items like helmets, rain suits and laptop computers. Please always follow safe guidelines:
Assure proper tire inflation.
If you change the normal load, you may need to adjust rear suspension.
Always place cargo load as low and close to center of motorcycle as possible. Use trunk for bulky, lighter items.
Make sure trunk is securely closed before riding.
Check headlight beam adjustment if you change normal load.
Never exceed maximum weight capacity of your machine including weight of accessories, cargo, rider & passenger.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.