Corbin Trunk Box for 2014-2015 Indian Chieftain & Vintage
Click or Tap to Activate Item
Corbin engineering visually keyed to the new Indian Chief! Featuring 45 liters of storage... enough to hold a full face street helmet with room to spare. Fully lockable with a lined interior and color matched exterior, the Corbin Trunk Box takes form and function to a new level.
On the outside, we take our design cues from the motorcycle's tank, fenders and saddlebags so the trunk looks like an extension of the factory bodywork. This provides a very clean look and disguises the large storage capacity. Hand painted and finished to coordinate with OEM paint colors. Includes aluminum struts and rack for simple installation.
NEW! We now integrate an LED tail/brake lamp setup for added visibility and safety on the road. Corbin wiring pigtail uses clip on wire taps to run right off your stock wiring harness and connects under the seat. Once installed, the three LED lights on the rear of the trunk illumiate with your taillight to help people see you on the road. Step on the brakes and it's an auxiliary brake light! Includes bulbs, wiring and red flushed in lens.
Includes passenger backrest pad and armrests covered in genuine leather. Built up of the same Comfort Cell foam as our world famous saddles to provide firm, resilient support. Ergonomic design gives a sculpted fit to the body for maximum contact area and good weight distribution. Tasteful diamond stitch pattern adds a nice custom touch. We will glady coordinate the trunk components to your existing Corbin saddle (if equipped).
Corbin's trunk comes fully lined, weather stripped and with a locking door to protect your cargo. As we mentioned above, the 45 liters (2746 cubic inches) is enough space to keep a full face helmet with some room to spare. Remember though, we have designed the trunk to work with the average full face street helmet and have not test fit all available models. Door opening is shown at right so you can estimate the sizes of items that will fit in the Corbin trunk.
A note about trunk loading: Our trunk box is constructed of polyurethane material which is extremely durable and strong. However, it is NOT a good idea to load heavy items in a motorcycle trunk. By nature, trunks ride high and too far rearward to handle weight properly. As such, you should reserve this space for lighter, bulky items like helmets, rain suits and laptops. Although it may withstand greater weights, we recommend a maximum load of 10 pounds.
Installation is simple and suitable for the average weekend mechanic. We include a four piece, machined aluminum rack system that integrates with the accessory mounting "spools" on the Indian fender. Corbin components are polished and black anodized for protection. Complete instructions included.
Please Note: The Corbin mounting rack now comes in black anodized finish rather than clear. This provides a much nicer and more subtle appearance on the Chief.
Manufactured of a specially designed polyurethane material for durability and a clean finish. Provides for very tight tolerances with minimal shrinkage so each part comes out true to the original design. Internal steel frames provide additional strength.
When ordering parts in "primer" you can expect a part ready for your painter's final preparation. Most Corbin components are also available prepainted and ready for immediate installation.
Corbin trunkbox comes fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the door keeps out the elements. Locking door keep contents secure.
Passenger backrest pad and armrests include genuine leather panels for a luxurious feel. Comes standard in natural grain black leather with custom options available at no extra charge.
Capacity: 45 liters (2746 cubic inches) Dimensions: 21" wide x 21" long x 15" tall Door Opening: Approx 11" x 14"
Corbin Trunk Box rack integrates with the accessory mounting spools supplied on the Indian Chieftain and Vintage models.
Once installed, the rack locks in place with a single allen head screw on each side.
The Corbin mounting rack now comes in black anodized finish rather than clear.
Trunk lighting wires to your OEM harness using clip on wire taps. Operates as a safety running light and auxiliary brake light.
The accessory mounting spools shown are not included with the Corbin trunk system. These are included with the Chieftain and Vintage models.
Loading Guidelines: It is not recommended to load a trunk heavily as it is carried too high and too far rearward to balance efficiently. Reserve trunk space for light, bulky items like helmets, rain suits and laptop computers. Please always follow safe guidelines:
Assure proper tire inflation.
If you change the normal load, you may need to adjust rear suspension.
Always place cargo load as low and close to center of motorcycle as possible. Use trunk for bulky, lighter items.
Make sure trunk is securely closed before riding.
Check headlight beam adjustment if you change normal load.
Never exceed maximum weight capacity of your machine including weight of accessories, cargo, rider & passenger.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Corbin Trunk Box, Painted, 2014-2015 Indian Chieftain
Corbin Trunk Box, Primer, 2014-2015 Indian Chieftain
Select Cover Options Below & Add to Cart
We do not always have a color match for all brands and model. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.