What's up with the name and the parrot? Click here to find out!

Corbin's new Contraband fairing offers Old School looks that blend in with the classic chopper styling of the Fury. Provides stunning, color coordinated visuals while giving you excellent wind protection so you can rack up the miles. All this combined with a convenient storage compartment perfect for your ride essentials.

Hand crafted specifically for the Fury by Corbin's R&D lead (and 20 year Corbin veteran) Vince Zavala... who else could have brought such a challenging project to such beautiful fruition?! Built into the classic lines of the fairing is seven liters of locking storage space which is plenty of room to hold bottled water, spare gloves, wallet, cell phones and other incidentals. This is an extremely convenient location for quick and easy access at fuel stops. Door is weather stripped to protect the contents, but this area is directly in the wind so some water intrusion may occur.

On the rider's side of the fairing you'll find an ABS dash panel that provides a clean finishing touch. In the dash is a small "glove box" type of open storage area to the right and the locking latch mechanism on the left. To open the Contraband storage compartment, simply pull the chrome plated latch and the door will pop open slightly on a spring catch. Chrome latch has a keylock built in to secure the storage area when desired.

For the fairing shape, we've taken an approach similar to a common touring windscreen, but upgraded the design to provide better areodynamics and a more aggressive line suitable to the Fury. Notice how the shape of the fairing starts at the headlight and flows back to part the wind more gracefully. This transfers the highest pressure area rearward of the steering pin which gives much greater stability at speed (a kind of rudder effect). This shape also brings the slipstream "bubble" further back to get you out of the wind.

As the fairing is designed to slip through the wind, it creates less turbulence and buffeting which gives you a quieter and smoother ride than the standard plexi windshield. Naturally this stability and low pressure slipstream for the rider helps to relieve fatigue associated with long days on the highway. It also helps to lower wind noise which adds to the comfort value.

Constructed of our Fibertech material for a smooth clean finish and durability. Fleetliner fairing is then hand painted to coordinate with your stock paint scheme. Topped off with a smoked windscreen for a beautiful piece that is ready to install right out of the box. If you are a taller rider and prefer a little more wind protection, we also offer a 10" clear windscreen in place of the smaller smoked one, just select the appropriate windscreen in the space provided. Please note that taller windscreens are designed to be looked through rather than over, so they should not be smoke or dark in color. A wide variety of windscreens are availble via your local Harley-Davidson dealer, just ask to see the options available for a 1997-2006 Harley-Davidson FLHTC model fairing.

Simple to install with complete directions and all required brackets included. To assure a perfect look on your Fury, brackets come painted to give a subtle appearance. Installation is suitable for an average weekend mechanic.

For Part Numbers, Pricing and Options, Please click on the ORDER tab.

Fibertech Construction	Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
ABS Storage / Dash	Dash panel and inside storage compartment components are constructed of vacuum formed ABS for UV resistance and a clean fit.
Finish	We use a quality gel-coat for a nice finish that doesn't show material weave. Comes to you prepainted to coordinate with your stock paint scheme.
Capacity	Front storage area provides seven liters of storage capacity.

Installation:	#H-FURY-FAIR
	Contraband Fairing is designed to mount up easily to your stock front end. Simple installation with complete instructions and all required brackets included. Brackets are painted to blend in.
	Storage area of Contraband fairing provides seven liters of storage capacity.
	The Corbin fairing was designed on a stock configuration motorcycle. If you plan on changing handlebars on your bike, this may impact functionality to some degree.
	If you'd like to customize the amount of wind protection &/or looks of the Corbin Fairing, you can use a variety of windscreens available from your local Harley-Davidson dealer. Ask them to see options available for 1997-2006 Harley-Davidson FLHTC models.
	If you have a handlebar mounted radio or other device installed, it may effect fit of the Corbin fairing.
	Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.

* Click the Product Image to Learn More *

Windscreens	Sure, you can order any of the windscreens we have premounted on your fairing, but if you've changed your mind and want to try a different one, you'll find them here. *Check 'em out...*

Testimonials:
Comments?	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
Submit Photos:	Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!
General Contacts	California Factory: Corbin Saddles 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Florida Showroom: Corbin Saddles 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 E-Mail General Mailbox

	ITEM	DESCRIPTION	SCREEN	PRICE
	#H-FURY-FAIR	Contraband Fairing One color, Honda Fury	Select Windscreen 5" Smoke screen 10" Clear screen	$2419
	We do not always have a color match for all brands and model. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
	Model Year
	Paint Color
		Enter Special Instructions Below
Please be sure to select/enter all options, if applicable, before clicking the "Add To Cart" button.

       

NOTE: Corbin products are designed to fit very close for cleanest look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you. Corbin Accessories should never be used with missing or damaged hardware as this can create an unsafe situation for rider &/or passengers.

MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.

CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.

SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, PLEASE READ

EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.