Young Guns saddle for 1998-2005 Road Glide, 1997-2005 Electra-Glide & 2006 CVO Electra-Glide
Click or Tap to Activate Item
The Young Guns saddle design gives your Bagger a low slammed look with plenty of comfort for you and a precision fit to your bike. Our high density Comfort Cell® foam provides resilient comfort and a low seating platform for a slim profile that looks awesome. The shape of the saddle follows the contours of your bike and molds along the crown and profile of the fender. The Young Guns tail section is padded and upholstered so it can take passengers for a short distance, but this model is designed primarily as a solo saddle.
In the front, we've built a seating platform that is concave in shape to fit the contour of your body and provide more square inches of body contact. Our seating sits you down into the bike into the sweet spot giving you a better feeling of control and allows for lower back support. This model provides over six inches of vertical back support! This gives you excellent comfort despite the low profile design. On top, we cover the saddle with genuine leather for a truly luxurious ride. Our V-Tail pattern on the tail section adds to the fast look of the saddle and integrates nicely with the vintage appeal of the Electra-Glide.
Corbin basepans ride on rubber bumpers to protect your paint job from scratching. Installation of the Young Guns saddle is simple and works on a new key lock system designed by Corbin.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Rider Seating: Approx. 12" wide x 17" long
Latch Pin Install Instructions: [ Page 1 ] Corbin's Young Guns uses a new key lock system for installation. We include a bracket with stainless steel latch pin that integrates with a lock mechanism on the Corbin saddle. In the front, the saddle is held down with the traditional tongue into the chassis.
To install, simply remove the two 7/16" nuts from the studs on your rear fender and remove the Harley-Davidson hand rail (if equipped). Install the Corbin bracket as shown with the bracket facing so the latch pin points straight up. Center the bracket on the studs and install the two 3/8" washers on top of the bracket. Now reinstall the stock nuts and tighten to 10 ft lbs. Now simply slide the noseof the saddle into place with the tongue into the chassis and lower the rear of the saddle onto the latch pin. Push down on the rear of the saddle above the latch pin until you hear TWO clicks.
To ease installation until the rubber bumper on the basepan break in, it may be necessary to add a washer between the Corbin bracket and latch pin.
Corbin's Young Guns saddle does not fit with the Harley-Davidson hand rail mounted to the fender. It WILL work with detachable trunkrests and passenger backrests if desired.
This saddle does NOT fit the FLHX model!
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.
Young Guns Saddle
Select Cover Options Below & Add to Cart
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.