You weren't really thinking about adapting saddlebags from some other bike onto your Spyder were you? A unique machine like this requires a unique design in order to look appropriate and that's just what we've come up with!
Corbin's Fleetliner bags were specifically designed for the Spyder to emulate the visuals of the bike and integrate perfectly. Notice how the lines and details of the stock bodywork has been incorporated into the design of the bags... some folks have even said the Spyder looks better and more "balanced" with the Corbin bags installed. As the saying goes, "a picture is worth a thousand words" so we'll let the images above speak for themselves.
Fleetliner saddlebags are specially engineered for each motorcycle so they fit the profile of the bike perfectly, like pieces of a puzzle. This enables the bags to carry the weight of the contents closer to the centerline of the bike and maintain perfect balance. Another benefit of our design and mounting system is a smaller overall width for less wind resistance. You won't even notice they're back there when riding and they remain stable at all speeds.
Because the Spyder doesn't lean in corners, we were able to make these bags larger than the average set... just over 50 liters per side to be exact. For those not committed to the metric system, that's 1.77 cubic feet (13.3 gallons) per side! To help you visualize, consider that a pair of saddlebags together holds roughly half of a 55 gallon drum! That's a lot of storage.
For loading, we've placed the doors on top of the bags and they open forward into the wind. This assures that contents will never spill out of your bags when you open them. The forward hinge motion helps the doors to self-close in the wind if you happen to forget them. Naturally the doors are fully weather stripped to keep the rain out if you should be so unlucky as to get caught in a storm.
Both bags come fully lined to protect your cargo and the doors feature adjustable locks for security. Installation is suitable for the average weekend mechanic and includes all required mounting brackets. Saddlebags are constructed of our Fibertech material for durability and a perfect finish and come to you prepainted to coordinate with factory paint in silver, red or yellow or gloss black for a more stealthy look. Available in a single, solid color or two-toned with black accent as shown on the yellow saddlebag for a little extra.
Fleetliner bags work with your stock turn signals and passenger footpegs. During installation you will be relocating these items to the Corbin saddlebag brackets. Notice also the stock muffler has been rotated down to allow more room in the right side saddlebag. We show our bike above with the stock silencer in the rotated configuration and also with a Micron pipe to release a nice note from that killer Rotax engine. If you'd like to change your pipe like we did, you'll be needing an adapter like the one offered by No Magic Neon Inc. (this is not part of the Corbin installation kit). If you are keeping the stock muffler, you will NOT need this adapter.
Combined with our saddle system, the Spyder becomes a formidable touring machine! Remember, although our saddlebags can hold an impressive amount of gear, it is never a good idea to overload your bike. Always conform to the weight limits outlined in your Can-Am owners manual to assure your safety.
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
Fleetliner saddlebags come through prepainted to coordinate with your factory paint job or in gloss black and ready to install right out of the box. Available in solid color or two-toned with black accent panels.
Corbin Fleetliner bags comes fully lined on the inside to protect your cargo. Locking doors keep contents secure.
Capacity: 50.2 liters per side Total weight: 37 lbs. Overall width installed: 44" Door Opening: 8" wide x 16" long
Corbin Fleetliner saddlebags do not work with DUAL exhaust systems like the Two Brothers Racing system as the bag does not offer enough clearance.
When using the stock exhaust pipe, the hanger will mount on the inside of the mounting lug on the Corbin bracket.
This is also true when using the performance Hindle exhaust available from your Can-Am dealer.
When using an aftermarket exhaust, the hanger will often be placed in the center of the canister as it was on this Micron system.
When that is true, use the outside of the mounting lug as shown here.
When loading saddlebags, remember to load heavy items at the bottom and as close to the centerline of the bike as possible. Don't throw disc locks and other items of that nature into the bag or it could create a pressure crack in the painted surface on the outside... place them in carefully.
Always obey guidelines in owner's manual for weight limits of accessories and cargo.
Corbin Fleetliner saddlebags will work with the BRP passenger backrest / sissybar system and the optional luggage rack platform.
The "Outdoor" cover available from BRP will work with the Corbin Saddlebags installed.
Installation Notes for Two Brothers M-2 canister. Provided by Ed D.
I found that in order to fit a Two Brothers 005-2290406 replacement 2008 Can-Am 990 slip-on exhaust system with a M-2 Canister on your Corbin Saddle bag bracket, I had to add a 2 inch long spacer with a 3 ½ inch long bolt and lock washer. See attached photos. What I did was take the spacer that comes with the kit for mounting to the stock Can-Am bracket and cut off the small diameter end and used that along with 3 ½ inch long stainless bolt.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Fleetliner bags single color, Can-Am Spyder RS
Fleetliner bags two-tone, Can-Am Spyder RS
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.