Corbin offers three models of trunkrests for use on your Harley-Davidson Tour-Pak. All are built up with our exclusive Comfort Cell foam for firm support and covered to match your Corbin saddle with genuine leather inserts and a host of color / material options.
Slim Trunkrest (#502-2) provides good passenger comfort with a wide, contoured contact patch while it keeps a clean profile on the bike. Built with High Density Comfort Cell foam material for firm support that lasts.
Designed to fit all model Tour-Paks and looks especially tough on the low profile Chopped Tour-Pak and even lower Razor-Pak. Our slim trunkpad installs easily by drilling the appropriate holes in your trunk lid (drilling template provided).
Ovalbac Trunkrest (#HD-503) gives your passenger generous body contact for more square inches of weight dispersion and long range touring comfort. Contoured contact area provides more support and less hot spots.
Works equally well on all three Tour-Pak models and especially the low profile models. Back of our pad is finished with an ABS finishing plate in a leather like texture to keep a very clean look on your bike. As shown above we can alternately provide a smooth rear finish plate so it can be color matched to your trunk / bike by your local painter.
Trunk Armrest (#HD-PAK-ARM) Our large touring armrest gives your passenger the maximum area of body contact and support possible for long range comfort. Contoured contact area and Comfort Cell foam provides more support and less hot spots. Longer armrests provide more support and a relaxing ride for your copilot.
Bottom of the arm rests are tastefully finished with ABS finishing plates in a leather like texture to keep a very clean look. Includes tasteful stitch pattern and chrome or black studs if desired. Will install on all three trunk models, but only works properly on the King Tour-Pak as otherwise the armrests are too low for passenger's use.
All Corbin trunkrest pads include your choice of leather colors and styles at no extra charge and choice of stitch patterns in a variety of thread colors. The small pad for lower section of trunk is also included and installs easily with adhesive backed hook & loop fastener. Please be sure to let us know which trunk model you have so we can send the appropriate size pad with your order.
All three trunkrest models bolt up to your H-D trunk just like the stock pad and fit on all years of the Harley-Davidson King Tour-Pak, Chopped Tour-Pak and Razor-Pak. Caution, these models are not designed to work on the Premium Leather Tour-Pak. If you are adding a trunk to your bike, please assure the base part number (without color code) is one of the following: 53274, 53270, 53332, 53325 or 53287. In some circumstances you may need to drill holes in the lid for fitment, we include a drilling template with the trunkrest.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
Slim Trunkrest #502-2: 16" wide x 6" tall Ovalbac Trunkrest #HD-503: 14.5" wide x 10" tall Armrest #HD-PAK-ARM: 14" wide x 10" tall, Arms 8"
Trunk pads will fit all of the HD Tourpaks, but remember you may need to drill holes in the lid to have the correct mounting points.
The Corbin trunkrest pads are not designed for the new Premium Leather Tour-Pak.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Trunk Armrest for HD Tourpaks
Ovalbac Trunkrest for HD Tourpaks
Slim Trunkpad for HD Tourpak
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.