Dual Touring Saddle for Victory Cross Roads, Cross Country & Magnum
Click or Tap to Activate Item
The most generously sculpted seating this side of your living room sofa... we call it The Dual Touring Saddle.
A new level of ergonomically designed perfection. Wide, sculpted seating positions create a larger area of contact for excellent weight distribution. Shaped like your body to eliminate pressure points and give long lasting support that will keep you in the saddle all day.
Corbin's Dual Tour saddle for the Victory embodies the Form and Function philosophy. Designed to look right and fit perfect while providing exceptional comfort and enhancements for your touring cruiser. For this bike, we put the emphasis on "Touring" and fully maximized the seating platforms for best possible weight distribution. Ergonomically shaped to give you support and comfort that will last all day. On the inside, our exclusive Comfort Cell® foam material gives firm support that conforms to your body. A host of options like backrests and seat heaters make this saddle extremely versatile too.
Dual Touring Saddle accepts two optional removable rider's backrests for added back support or works with your Victory trunk if desired. Our backrests are fully adjustable to provide a tailored fit to individual's posture. Support hardware is internal to the saddle to keep a clean look without external contraptions. In the front, we've engineered a second adjustment that allows the position of the rest to be adjusted fore/aft. This special hardware also allows the backrest to fold down to ease mounting the bike. Saddle works with a variety of backrest styles.
You can use a single backrest that transfers front to back as needed or get two backrests for full time use. Installation is easy enough to make this possible at a moments notice. Simply slide the backrest shaft into the built in hardware and secure it in place with the provided setscrew. Once installed, all adjustments can be performed without removing the saddle. Like the saddle, Corbin backrests are shaped to fit the curve of your body for a better fit and greater comfort. Corbin's Dual Tour saddle will also work with the Victory sissybar or the Corbin Trunkbox.
If you're running the Victory trunk, we offer a coordinated two-piece trunkrest to provide a coordinated look. Trunkrest is sculpted to provide ergonomically designed support with longer armrests for your passenger. Constructed of the same high quality materials as the Corbin saddle for years of enjoyment.
The ergonomic design of the Dual Touring saddle also gives a nice flowing shape on the bike for a clean look. Inside the saddle, Corbin's Comfort Cell® foam provides a nice firm perch that supports your body indefinitely and doesn't cave in like softer materials. Comfort Cell Cell® feels firm when you first ride on it, but it is this support that gives you daylong comfort. Notice also, the amount of vertical support offered by the bucket design of the Corbin saddle... over 5" of vertical support or 15" with a backrest installed!
Corbin's Dual Tour saddle is available with or without electric seat heaters built in. This option provides a very nice bit of luxury especially on those chilly morning rides. If you've never ridden on a heated seat, you'll be amazed at how well this raises riding comfort. On the Corbin saddle, we've separated the switches and placed each one conveniently along the left side of the seating platform. This makes them very easy to locate while riding and with gloved hands. Simple installation with a wiring harness that integrates with your Victory's fusebox. Low and High settings are maintained automatically with integrated controller.
We use genuine leather seating panels for a luxurious ride that breathes with your body. Leather is extremely durable and will break in along with the foam shape to conform to your body. Be sure to care for your leather saddle properly with a quality conditioner like our Saddle Cream. This will help the hide to resist the elements and remain supple. The leather seating will conform along with the foam shape and provide a personalized fit to your posterior. Over time, your leather saddle will develop its own unique character just like your leather jacket does.
If you're looking to add a little more storage space to your bike how about a cool new glovebox for the rear of your backrest. Designed to carry four liters of your essential stuff like cell phones, spare gloves, bottled water, maps and sunglasses. Constructed of durable ABS and painted gloss black for a perfect finish. You can leave this mounted on your backrest full time or swap it with a regular finishing plate as needed. Installation is just two screws! Comes fully lined and weather stripped with two keys.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.
Rider Seating: 16" wide x 13" long x 5" deep Depth w/ backrest: 15" Passenger: 14" wide x 13" long Approx seat height: 26"
Dual Touring saddle installs easily on your bike using existing positions on your bike. All installation hardware is include so your new saddle is ready to go right out of the box. Seat heaters work with supplied pigtail that wires to the Victory fusebox.
When using the Victory sissy bar system, it is best to install the sissybar BEFORE the saddle, otherwise damage to the seat can occur.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.
Dual Tour saddle w/ HEAT, Victory Cross Country
Dual Tour saddle no heat, Victory Cross Country
2-Piece Trunkrest for Victory Trunk
Glovebox painted black (backrest sold separately)
Ovalbac Standard Backrest (each)
Select Cover Options Below & Add to Cart
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Corbin Motorcycle Saddles & Accessories Have Been Made with Pride in the USA since 1968