The proverbial 400 pound gorilla of Super-Motos! There's nothing more entertaining than shredding up some country twisties on a two-wheeled asphalt eating machine like KTM's 950 SM R. There's nothing more annoying that having to pause said activity for a case of butt burn. We've got just the solution for you.
We've built a wide, contoured seating platform that allows a full range of motion front to back while offering wider, more ergonomically correct support. Inside the saddle, our exclusive Comfort Cell foam provides a firm supportive ride that lasts. This exclusive foam material allows us to build a lower profile and still give you just the right amount of resilience. Firm enough to keep your body supported, but soft enough to cushion the ride.
Saddle's concave shaping provides more square inches of body contact which creates better weight dispersion and helps to eliminate hot spots. Our rigid Fibertech basepan is designed to support the complex shaping of the foam and keep the carefully designed ergonomics intact. Our wider, sculpted seating helps to eliminate the centralized pressure created by the oem unit.
Our unique materials and high density foam allow us to lower the seating platform without sacrificing comfort. Not only does this create better ground reach, but lowers your center of gravity for better handling. We've taken the seat height down approximately 3/4" compared to the OEM unit. We've also kept a smooth transition up the tank to allow you to slide your body forward when needed.
On the outside we use only the finest materials available for unique looks and durability. We recommend Carbon-Fiber leather seating panels with contrasting Asphalt viny side panels as shown on this page. This combination gives a very custom look that doesn't overpower the bike visually. Tasteful Corbin logos is embroidered in one side.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
Seating area: 11" wide x 32" long
Seat height: 33"
Installation is simple and uses your factory lock system for complete ease. Brackets come premounted on the saddle so it's ready for immediate installation. Saddle secures in three places with a clip at the nose, steel tongue into the chassic and stainless steel latch pin at the rear.
This saddle Does Not fit the 950 SM.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Super-Moto saddle for 2007 KTM 950SM R
Select Cover Options Below & Add to Cart
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.