Corbin's two piece seat systems is modular to allow you to switch from solo bike with a Smuggler storage trunk to dual quickly and easily. Naturally we've also enhanced the ergonomics to create a perch that provides long-range comfort and support. Both front and rear saddles offer you a more sculpted seating platform that conforms to your body and give more body contact and support. For an added bit of luxury, integrated seat heaters are available for both seats too!
Of course we engineered in a removable passenger backrest for added security. Corbin's passenger backrest adjusts to provide a tailored fit to your copilot's stature and riding posture. Once installed, the backrest is easily adjusted with a single setscrew accessed from the rear. Mounts into hardware concealed inside the saddle for a perfectly clean look. Notice how the Corbin Ovalbac backrest is shaped to fit the contour of your back to maximize comfort and support value. The oval shaping of this model also helps to keep your body cool by not trapping heat.
Our exclusive high-density Comfort Cell foam allows us to build a highly supportive saddle without putting a bulky shape on your bike so it always looks good. The Corbin Wizard's are masters at combining form and function into a saddle that makes you as happy to look at as it does to ride on. Our unique Fibertech basepan molds to every contour of the bodywork for a precision fit but rides on rubber bumpers to protect your paint job. Installation is simple with included bracket and your Kawasaki key lock system.
Notice how the bucket shaping is designed to emulate the shape of your body. This gives excellent support for longer range. Our neutralized seating helps to curb sliding in the saddle, which greatly reduces rider fatigue. Naturally we include your choice of color options for a look that can range from outrageous to stealthy. We've created a cover design and stitch pattern that coordinates with the ZZR perfectly and adds to the visual appeal of the bike.
There's nothing quite like heated seating for those chilly morning rides to raise your core body temperature. We incorporate a heater unit under the leather seating and a switch on the left side of the saddle (so you can turn it on without removing your hand from the throttle). Just flip the switch to the low or high position and the seat will warm up and maintain temperature automatically. Comes completely preinstalled in the saddle and you need only integrate the included pigtail to your fuse box. Because of the two piece design, front and back saddles have separate switches that run through a dual pigtail.
Already have a Givi Topcase? No worries, we've designed our saddle system to work with the top box installed. When run in this configuration, the Corbin backrest for your passenger will not install on the bike. Speaking of the Corbin backrest, if you're looking for something a bit flashier, you have a choice of finishing plates. The standard plate is a leather look ABS model, but included is your choice of Carbon-Fiber look, aluminum look or primer (for custom paint applications). For just a little extra, we can supply a chromed steel backing plate or one prepainted gloss black.
Need a little bit more convenient storage but don't want to install the Givi trunk? Take a look at this great glovebox option we now have for the Ovalbac backrests. This little beauty bolts on in place of the finishing plate and gives the perfect amount of locking storage for little essentials. We can easily pack in a couple bottles of water, a PDA, cell phone, spare gloves, maps and sunglasses with room to spare. You'll find this the most convenient and easy to use storage on your bike.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.
MODULAR SEAT SYSTEM: This component is part of Corbin's patented modular seat system (US Patent #7,556,114). Engineered to work in a variety of configurations to provide maximum versatility on your motorcycle. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. Click the button to see how it all works.
Rider seating: 12" wide x 14.5" long Rider back support: 5.5" Passenger seating: 11" wide x 11" long Approx seat height: 30.5"
Saddles install with a proprietary bracket installed into stock locations on your bike. Once the bracket is installed, both saddles install very easily and use your existing key lock.
Front saddle slips into place with a tongue in the front. Rear of the saddle is held in place with this lock that integrates with a stainless steel latch pin on the Corbin bracket.
(Shown with front seat removed) Rear saddle is held in place with two chrome tongues under the Corbin bracket and the latch bracket transferred from your stock seat to integrate with the Kawasaki lock.
On this seat model, you will need to secure the backrest in place with the safety screw BEFORE the rear saddle is installed on the motorcycle.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Front saddle, heated
Front Saddle, non heated
Rear Saddle, heated
Rear Saddle, non heated
Ovalbac Leather Backrest (ea)
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.