Corbin's new pilot saddle for Kawasaki's ZX-10R motorcycle is designed to provide you with long range sport touring comfort on your liter bike. The saddle has been engineered to provide you with a more comfortable riding position, while maintaining the smooth sleek lines of your ZX-10R.
This saddle is built up in the front to reduce the tendency to slide forward. The slight bucket shape of the saddle disperses your body weight over a greater area and helps to eliminate any centralized pressure on your body. Both the built up front and the bucket shape work together to take away a lot of the strain from your legs and knees; allowing you to ride longer.
As with all Corbin saddles this pilot saddle for the Kawasaki ZX-10R is built using our exclusive Comfort Cell® Foam. The Comfort Cell® Foam is a dense foam that is firm at first. However, this firmness is what allows you to ride further and more comfortable. After a while the foam will break-in and begin to form to your body and riding posture, giving you a truly custom fit an feel on your bike.
As you can see Corbin wants this saddle to not only feel good on you, but we also want it to look good on the bike. So, Corbin's patented molding and manufacturing process provides a precision fit to the tank and tail section of the bike. Furthermore, the saddle is designed to ride on rubber bumpers to protect the bike's paint, while preserving the clean lines of the ZX-10R.
The genuine leather seating provides excellent comfort and will break in along with the foam of the seat for a truly personalized fit. In fact we let you choose the type of leather for your seat an also the color of the optional welt. Also the traditional Corbin tag has been replaced with a contrasting logo embroidered right into the side panel of the seat.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
Seating: Approx. 12" wide x 12.5" long Approx. seat height: 33"
You're new Corbin seat mounts just like the stock seat. To remove you're stock front seat. Remove the rear seat by inserting the key in the key slot on the left side of the tail panel. Once the rear seat has been removed, two allen bolts holding down the center tail body panel will be exposed. Remove this panel to expose the bolt securing the rear tab of the front seat. Remove, but keep the bolt securing the rear tab of the front seat.
The stock seat is ready to be removed: Lift the seat back and upward so the front tongue of the seat can slip out.
The Corbin seat has the same features as the stock seat. It has the front tongue at the nose of the seat and the mounting tab bracket at the rear. To begin slip the seat into place while hooking the front tongue into the receptacle where the stock seat was and lining up the rear tab with the threaded hole in the frame. Now go ahead and reinstall the center body panel and the rear seat back on.
The use of a thread locking product, such as Loctite, should be used when re-installing this rear stock bolt.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.
Pilot Saddle 2004-2005 ZX-10R
Select Cover Options Below & Add to Cart
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Corbin Motorcycle Saddles & Accessories Have Been Made with Pride in the USA since 1968