Mike's experience in aerodynamics and the magic touch of the Corbin R&D workshop combine to make a wind management system that functions every bit as good as it looks. Designed to adjust so it will work perfectly for a range of rider statures. This also makes it perfect for different riding applications... Lower it for more aggressive riding or raise it up for additional wind protection and cruising the highway in comfort.
Trimtab design was engineered to take control of the wind and manage it for increased rider protection. Naturally this wind management relieves the pounding you take at highway speeds, but it also makes the bike's front end more stable. More aerodynamically efficient than a traditional plexi windscreen (or no fairing at all), our testing has shown to actually increase fuel efficiency by roughly eight percent!
Because of the unique design, we were able to bring the fairing much closer to you which keeps you in the slipstream. Corbin's adjustable Trimtab fairing comes prepainted to match your stock paint job and is ready to install right out of the box. The wind splitting aerodynamics provide a graceful look that integrates well with your Honda's bodywork. Fairing is constructed of our exclusive Fibertech material for a perfect finish and long term durability.
Placement of the adjusting knob is front and center making it easy to reach and adjust. You can even adjust the fairing height while riding. For a clean look and simple installation, we've engineered our fairing to install easily into your stock front end components with all brackets and detailed instructions included. The only thing you'll need are a new set of turn signals. For an integrated look, we use a set of turn signals that you can get from your local Harley-Davidson dealer (information below).
OK, we've made a lot of pretty tall claims as to how it makes your bike more stable and it gives you more wind protection, etc. The genius of the Corbin fairing is in its simplicity. In order to better show you how it works, we've created a separate page called "How it Works" (catchy huh?) If you want the full, detailed explanation, just click on the image off to the side. Please note, the page may feature a different application of the Trimtab fairing, but the principal itself remains.
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
We use a quality gel-coat for a nice finish that doesn't show material weave. When ordering parts in "primer gel-coat" you can expect a part ready for your painter's preparation. Most Corbin components are also available prepainted and ready for immediate installation.
Trimtab fairing has approximately five inches of travel when measured at the trailing edge. Adjust the slipstream to your stature and current riding conditions with a simple twist of the wrist.
The Corbin Trimtab adjustable fairing has approximately 5" of travel at the trailing edge through the total adjustment.
Fairing requires turn signal kit (#68005-99) and two stand-offs (#68821-00) from your local Harley Dealer. Corbin fairing does not work with stock turn signals.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
We do not always have a color match for all brands and model. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
Please be sure to select/enter all options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.