After many, many requests by the PC faithful, Corbin has retooled a seat design for this super machine. Naturally Corbin has perfected the ergonomics and created a perch that provides long range comfort and support. Our saddles offer you a more sculpted seating platform that conforms to the shape of your body and greater square inches of body contact. Of course we build them up with our Comfort Cell foam for firm support that lasts all day and engineered in a removable, adjustablepassenger backrest.
Corbin's passenger backrest is designed to be adjustable to provide a tailored fit to your copilot's posture. Once installed, the backrest is easily adjusted with a single set screw accessed from the rear. Installs into hardware concealed in the saddle for a perfectly clean look. Notice how the Corbin Ovalbac backrest is shaped to fit the contour of your back to maximize comfort and support value. The oval shaping of the model also helps to keep your body cool by not trapping heat. Around the garage, it makes a convenient hand hold. Note: on this seat, the backrest must be installed prior to seat installation in order to reach the manditory safety screw.
Notice how the shaping is designed to emulate the shape of your body. This gives excellent support for longer range. Our neutralized seating helps to curb sliding in the saddle which greatly reduces rider fatigue. Naturally we include your choice of color options for look that can range from outrageous to stealthy. We've created a cover design and stitch pattern that coordinates with the Pacific Coast perfectly and adds to the visual appeal of the bike. Shown here we've used our Pigeon Grey vinyl material for a relatively close match to the stock components.
Of course, the Corbin saddle components are designed to keep the hinge function of your Pacific Coast trunk. Installation of the front and rear saddles is easy with mounting similar to stock. On the Corbin rear saddle there is an additional bracket that needs to be installed from under the trunk lid. Inside the saddle we use our exclusive Comfort Cell foam to provide a firm, resilient ride that gives you long lasting support. This closed cell foam type will support you for long days in the saddle and will actually break in to take on a personalized fit.
Neutralized seating posture helps to curb the tendency to slide forward in the seat which helps to reduce rider fatigue. Corbin's rigid Fibertech basepan material provides a perfect fit to the body groove for a very clean look.
We attempted to engineer this seat design to allow the side covers to be removed without taking off the seat, but it left an unsightly gap that we just couldn't live with. However, the Corbin saddle does remove easily with just two bolts.
Corbin's rear saddle features the same, generous ergonomic shaping as the front saddle, but also works with a Corbin backrest or your Hondaline passenger backrest if you prefer. Notice also the custom stitch pattern we worked into this model. Corbin's rear saddle also offers generous vertical back support for the rider (just over six inches). Choose from a range of Corbin backrest models to suit your taste.
For maximum versatility we've designed the Corbin components to interchange with the stock Honda pieces. Notice how the backrest works with an internal bracket that doesn't clutter up the look of your bike.
Our Ovalbac backrest has removable finishing plates on the rear that allow for a custom look. The standard plate is a leather look ABS material, but we also offer Carbon-Fiber or primer. For just a little extra we can also provide a chromed steel model. If you're looking to add just a bit more storage space, take a look at the Corbin Glovebox shown here. Enough room for a couple bottles of water and some other small essentials like a pair of gloves, your PDA, Cell Phone and some Maps. Complete Glovebox information.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
Rider seating: 15.5" wide x 14" long Rider back support: 6" Passenger seating: 13" wide x 12" long
Front saddle mounts like stock with a tongue in the front and two bolts in the rear. Seat brackets are included and come premounted on the saddle.
Corbin's rear saddle mounts very much like the stock unti with the hand rails going through the saddle and being held in place with the stock bolts. You will not use the bolt that holds the rear of the grabrail to the saddle.
Under the saddle there is a bracket you will install to secure the rear saddle from moving around when mounted. Simply secure it in place as shown with the included hardware and you're ready to roll.
On this seat model, you will need to secure the backrest in place with the safety screw BEFORE the rear saddle is installed on the motorcycle.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.