Corbin Fleetliner saddlebags are designed to fit specific bike models so they're visually integrated to look perfect! Notice how the Corbin bags mimic the shape of the fuel tank and follow the graceful line of the fender. This helps the bags enhance the look of the bike rather than just being an add-on. We also design our saddlebags to fit close to the profile of the V-Rod for improved weight handling and aerodynamic efficiency. As you can see, the integrated shape adds to the Hot Rod look and is visually far cleaner than "one shape fits all" style hard luggage.
Since the interior wall fits so closely, we can keep the saddlebags narrow and carry the shape around the rear fender. This keeps weight bearing close to the centerline of the bike which helps to maintain a good center of gravity. When loaded properly, you won't even know they're back there while you're riding and the bike remains stable at all speeds. These bags were designed by the same guys that ran Suzuki Hayabusa saddlebags over 180 mph on the Bonneville Salt Flats.
Both bags feature top loading so contents can't spill out when opened and they will self close in the wind if forgotten. We mold the bags close around the fender for a clean look and proper load bearing. This allows the bags to carry weight in near the centerline where it won't upset your balance. This design also keeps a narrower profile for less width to worry about when lane splitting. Our design team shaped these bags to work with your stock exhaust system, but they will work equally well with any system that has a profile lower than the stock pipe.
Fleetliner saddlebags mold around the passenger's legs to maximize capacity without creating an overbearing look on your sleek machine. We are often asked if a full-face helmet will fit inside our bags and we're sorry to say "it will not." Creating a set of bags with enough width to hold a full face helmet, would have made them extremely wide which would make them unstable at higher speeds. However, their 26+ liter capacity (per side) will provide plenty of room for weekend getaways and daily commutes.
Corbin bags are constructed of our exclusive Fibertech material for a perfect finish and long term durability. They come prepainted and ready to install right out of the box color coordinated to your stock paint. Triple chrome stripes are included for a nice finishing touch. The end result is a set of bags whose form is as perfected as their function.
Both bags come completely lined to protect your cargo and feature locking doors for security. Molded to fit perfect with your stock turn signals so there's no wiring to be concerned with. Sure seal weather stripping and adjustable locks keeps them watertight. Saddlebag lids are molded using our new RTM (Resin Transer Molding) process so they're more rigid and finished on both sides to look nicer open or closed.
Beetlebags are engineered to work with the Sissy Bar / Passenger Backrest baseplate available from Harley-Davidson! Naturally there is a Corbin seat available that looks great and provides the comfort you need to be able to take advantage of the touring capacity allowed by the Corbin saddlebags. Shown here with our two-piece Dual Touring saddle.
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
We use a quality gel-coat for a nice finish that doesn't show material weave. When ordering parts in "primer gel-coat" you can expect a part ready for your painter's preparation. Most Corbin components are also available prepainted and ready for immediate installation.
Corbin Fleetliner Saddlebags come fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the doors keeps out the elements. Locking doors keep contents secure.
Capacity: 26 liters per side Overall width: 35 inches Door opening: 9" x 16"
Installation is simple using hardware and brackets that are included. Corbin bags are designed to work with your stock turn signals so there is no wiring to worry about. Suitable for an average weekend mechanic, complete instructions included.
When loading items inside the bags, it is best to load heavy items closest to the bike for best load bearing and balance. It is important to load items like disk locks carefully. If you throw an item like this into one of the bags, it can create pressure cracks in the paint on the outside of the bag.
These bags are designed specifically for the 2007+ model V-Rod with the larger rear tire (240 series). They do not fit earlier models or the Street Rod.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
We do not always have a color match for all brands and model. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
Please be sure to select/enter all options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.