Dual Touring Saddle for 2006 H-D Screaming Eagle V-Rod
Click or Tap to Activate Item
Touring comfort probably wasn't at the top of your list when you got your CVO V-Rod was it? Fortunately, Corbin has designed a seating solution to provide exactly that. Our deep, supportive bucket is dished out to fit your body's shape to eliminate hot spots and pressure points. This also creates more square inches of body contact for increased weight distribution. Add another nine inches of vertical back support via the Corbin removable backrest and you'll be ready to take on the baggers.
Naturally we thought about your copilot too. Notice how we've built a shape that fits up perfectly to the V-Rod fender, then flares out to provide wider seating. The flowing shape of the seat tapers back to fender width towards the rear to keep nice visuals. Of course we've ergonomically dished the seating platform here to give your passenger better weight distribution and eliminate centralized pressure. The Corbin backrest works here as well... and since it is fully adjustable, you can order a single backrest that you transfer back and forth or get two for full time use.
Corbin backrests are available in different styles to suit your taste and are fully adjustable to provide tailored support. For the best combination of form and function we recommend the Ovalbac model #02-S as shown here. The Ovalbac backrest is sculpted to fit your body shape and also features finishing plate options for a bit more custom look. Comes standard with an ABS plate in either a leather or carbon-fiber look. For just a little extra we can provide one painted gloss black or a chromed steel model that goes nicely with the other chrome bits on your V-Rod.
Corbin’s Dual Tour saddle comes in two pieces so it mounts like the stock seat and hinges to provide access to your fuel tank. Our front saddle will work with your stock rear if you wish, but it was not specifically designed to do so. As such, it does not really look appropriate (in our humble opinions). Virtually all orders for the front seat eventually call to get the rear seat as well.. just letting you know ahead of time so you don't get mad at us.
We build up the saddles and backrest with our exclusive Comfort Cell® foam for a firm supportive ride that lasts. Genuine leather seating is inlcuded in your choice of styles (standard black leather shown). Leather provides a nice breathable perch that will break in with your foam shape for a personalized fit. Color coordinated welts are available if you desire a more personalized look.
Remember, leather has very unique characteristics that help it remain the finest material known for building comfortable saddles. Leather is a treated organic material that will breathe with your body and adapt to your body shape. Leather actually works with your body by stretching, reconforming and enriching comfort. Leather saddles will start to show their own character with time and use. You can help your leather saddle by treating and protecting with Corbin Saddle Cream when cleaning your motorcycle. Your Corbin leather saddle will serve you best when cared for properly.
Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac model backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black. Go HERE for complete info.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
Seating: 13" wide x 16" long x 13" deep Passenger: 10.5" wide x 10" long
Corbin saddles mount like stock with hardware pre-installed on the saddle. Remember to turn the key and gently latch the front seat as recommended by Harley-Davidson. Slamming the seat down to latch it could result in a broken tab. You will need to transfer the seat cable onto the Corbin seat from the stock one.
Pillion installation: Remove the stock rear seat from your bike according to your owners manual. Corbin's pillion seat slips onto the rear fender bracket like stock and is bolted down under the front solo using the original bolt. That's it, you're done.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Corbin Motorcycle Saddles & Accessories Have Been Made with Pride in the USA since 1968