The uniquely styled Classic Solo looks excellent on your Softail while providing an extraordinary amount of rider comfort. Corbin's seating platform conforms to the shape of your body for maximum support and more square inches of body contact. This is one of the secrets of long range comfort and is a staple of Corbin design. For added back support, our Classic Solo saddle accept an optional rider's backrest that provides an additional nine" of vertical support.
Corbin backrests install easily into hardware concealed inside the saddle for a very clean look. In order to fit a wide range of riders, it is fully angle adjustable. Just install the backrest into the saddle, lock it in place with a single setscrew and adjust the backrest angle to suit. A variety of backrest styles are available to suit your taste and the amount of support desired. Shown above with our two most popular models: #297-SB (solid) and #02-SB Ovalbac. #297 includes Winged Wheel logo stitched on the front and embossed in the rear finishing plate, Ovalbac model comes smooth for a clean look.
For maximum versatility we've designed the Corbin solo saddle to work with a passenger pillion seat. Pillion pad is built with our exclusive high-density Comfort Cell foam to provide firm support that lasts. It comes decorated in your choice of leather styles to coordinate with your Corbin solo. Installation is simple with all required hardware included. Passenger pillion works with a variety of H-D accessories and options like the "detachable" sissy bar.
For an added bit of luxury, the Classic Solo saddle has the option of electric heated seating. You'll be amazed how a heated seat can raise your core body temperature during one of those chilly morning rides. This system easily wires directly to the Blackline's battery and provides heat with the flip of a switch. Heater unit and controller are built into the saddle and come preinstalled. Switch is conveniently located on the left side of the seat.
Shaping of the Classic Solo is designed to emulate the contour of your body. This gives excellent support for longer-range comfort. Our neutralized seating also helps to curb sliding in the saddle that greatly reduces rider fatigue. Inside, the solo and pillion are built up with our exclusive Comfort CellŪ foam for a firm, supportive ride that lasts. Corbin saddles feel firm when you first ride on them, but this firmness is what supports your body and maintains the correct shape. Over time, Comfort CellŪ will break in and provide a personalized fit to your body for even greater comfort.
Corbin's backrests come covered to match your saddle and also offer the option of custom finishing plates on the rear. Backrests come standard with an ABS leather look backing plate but you can choose a carbon-fiber look or a paintable model at no added charge. For a little extra we offer pre-painted gloss black that coordinates perfectly with the look of the bike.
Looking to add a bit of storage to your bike? We now offer this slick "Glovebox" that bolts up to the Corbin backrests in place of a finishing plate (#297-B & #02-SB only). This little beauty provides four liters of locking storage with is plenty for all your small essentials like cell phones, maps, water bottles and even a spare pair of gloves. Fully lined on the inside to protect your cargo and the locking door keeps it all secure. Constructed of durable ABS and available prepainted gloss black. Click on over to the Glovebox page to learn more HERE.
Saddles and backrests include genuine leather seating panels in your choice of colors and styles and a tasteful flame stitch pattern in choice of thread colors. Leather provides a luxurious perch that breathes with your body enhancing comfort value. Leather will also break in along with the foam shape in support of the personalized fit. In the side panels we use a coordinating vinyl material to keep the saddle looking sharp longer and support the foam shape. We also include the option of chrome or black studs at no additional charge (be sure to specify when ordering). Leather seating will perform for years and add value to your Corbin investment. Over time it will develop its own unique character just like your leather jacket.
Shown above in the following combinations:
Bomber Jacket leather seating, sides and stud band. No welts. No studs. Gold stitch.
Natural grain Black leather seating. Black sides, stud band and welt. Black studs. Black stitch.
Natural grain Black leather seating. Black sides, stud band and welt. Chrome studs. Orange stitch. Optional heat.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.
Solo Seating: 14" wide x 15" long, 7" vertical support Passenger: 6" wide x 12" long
Classic Solo installs using Corbin's unique key lock system. Once the bracket is installed, the Corbin solo will mount and remove using the integrated key lock.
Passenger pillion installs with included stainless steel pins mounted to stock points on your HD fender.
If ordering with optional heat, we include a pigail that integrates with the battery for seat power. NOTE: Since the heater is connected directly to the battery, it does not automatically turn off with the ignition switch.
Corbin's 50's pillion will not fit properly with the HD sissy bar that has attached luggage rack.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Classic Solo, 2011-2015 HD Blackline & Slim, Heated
Classic Solo, 2010-2015 HD Blackline & Slim, non heated
Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.
Classic Solo, 2011-2015 HD Blackline & Slim, Heated
Classic Solo, 2010-2015 HD Blackline & Slim, non heated
50's Style Pillion, 2010-2015 HD Blackline & Slim
Glovebox Only, Painted Black
Standard Corbin backrest
Ovalbac Standard Backrest (each)
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Corbin Motorcycle Saddles & Accessories Have Been Made with Pride in the USA since 1968