* Read *

Hollywood Solo saddle gives your bike a slick, low profile look while providing you with reasonable, boulevard cruising comfort. Our Fibertech basepan provides a perfect, flowing fit along the tank, chassis and fender, but rides on rubber bumpers to protect your paint job. Naturally, Hollywood Solo is built up with high density Comfort Cell^® foam to provide a firm resilient ride despite the incredibly low profile. It's seats like this one that brought Mike to the development of our infinite ratio foam!

Hollywood Solo comes standard with genuine leather seating in your choice of colors and styles. Leather seating is great for motorcycle saddles because it breathes with your body and will break in with the foam shape for a personalized fit. Leather is extremely durable and works great for motorcycle saddles. Over time your saddle will age and develop a unique character just like your leather jacket and chaps do. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years.

Our saddle mounts with a new key lock system designed by the Corbin wizards. We include a special bracket that bolts up to your Roadking fender and has a stainless steel latchpin on top. Once this bracket is in place, you install the Hollywood Solo easily with a supplied key. Just slide the front of the seat in place with a tongue into the chassis at the front. Then lower the saddle onto the latch pin and push down firmly. To remove the saddle, just insert the key and turn to release the lock and saddle is ready to remove... quick and simple!

Hollywood Solo is a great setup if you want your Roadking to have a low and slammed look. Notice how the shaping matches perfectly to the tank, dash and fender... this kind of fit is available only in a Corbin saddle. Our rigid Fibertech basepan provides a good foundation for the foam shape to offer you excellent support. Our exclusive Comfort Cell^® foam is engineered with an ergonomic shape that provides a greater area of body contact for better weight distribution and maximum comfort with a low profile. Sculpted shaping in the nose area assures that you still have good ground reach at stop signs.

	UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
	FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
	COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
	ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
	PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
	GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
	KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.

Measurements:	Rider Seating: 11.5" wide x 19" long Approx. Seating Height: 27.25"
	Latch Pin Installation Instructions: [Page 1] New Corbin designed key mount system makes for simple on-off installation onto your stock 2004 Roadking Custom.
	Simply install this bracket onto your bike into stock locations in your fender. Secure the bracket in place and you're ready to mount the saddle.
	Saddle will now mount and remove with a key lock built into the right side of the saddle (just behind your bum). All hardware and two keys included.
	Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.

#Conditioner Saddle Cream®	Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Apparel Tees, Hats & More	We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*
Furniture Barstools & Auto Furniture	Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave! *Check 'em Out*

Testimonials:
Comments?	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
Submit Photos:	Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!
General Contacts	Hollister Factory: 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Daytona Showroom: 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 E-Mail General Mailbox Online Service Center

ITEM	DESCRIPTION	PRICE
#HD-RKH-4-CUS	Hollywood Solo	$333
Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

	ITEM	DESCRIPTION	PRICE
	#HD-RKH-4-CUS	Hollywood Solo	$333
	#CVR-HW	Select Cover Options Below & Add to Cart	0.00
	Seating Panels	Black Leather Asphalt vinyl Black Vinyl Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber leather Black Carbon-Fiber, hi-gloss Black Carbon-Fiber vinyl Black Grabber Black 'Ostrich' leather Black 'Snake' Blue Carbon-Fiber vinyl Bomber Jacket BROWN Bomber Jacket BLACK Burgundy vinyl Carbonium Charcoal Gray vinyl Charcoal Carbon-Fiber vinyl Charcoal 'Snake' leather Chocolate Brown leather Classic (Basketweave) leather Candy Red vinyl Emerald Green vinyl Forest Green vinyl Ghost Gray vinyl Goldenrod vinyl Gray leather Gray Partner's vinyl Gray 'Ostrich' leather Gray 'Snake' leather Harley Blue vinyl Indian Tan leather Interceptor Blue vinyl KTM Orange vinyl Lavender vinyl Lime Green vinyl Medium Stone Ninja Red vinyl Navy Blue leather Oaknut leather Orange vinyl Otter Brown vinyl Oxblood vinyl Pigeon Gray vinyl R-80 Red vinyl Red Carbon-Fiber vinyl Red Natural Leather Royal Blue vinyl Silver Carbon-Fiber vinyl Sky Blue vinyl Smoke Gray vinyl Tan leather Tan 'Baby Alligator' Tan 'Ostrich' leather Taupe vinyl Teal vinyl Tomato Red vinyl White vinyl Yellow Yellow Carbon-Fiber
	Side Panels	Black Asphalt Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black Grabber Black 'Snake' Blue Carbon-Fiber Bomber Jacket BROWN Bomber Jacket BLACK Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Indian Tan Interceptor Blue KTM Orange Lavender Lime Green vinyl Medium Stone Ninja Red Navy Blue Oaknut Orange Otter Brown Oxblood Pigeon Gray R-80 Red Red Carbon-Fiber Red Leather Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Taupe Teal Tomato Red White Yellow Yellow Carbon-Fiber
	Special Notes
Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

       

PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.

SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read

EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.