Fleetliner Saddlebags for Rolling Thunder chassis 200 and 250 Series
Click or Tap to Activate Item
Corbin has taken the Bagger to a whole new artistic level... and now, the awesome Fleetliner saddlebag setup is available for the Rolling Thunder 200 & 250 series chassis'.
First you'll notice the complete lack of visible hardware and brackets on the rear. Every custom bagger we've seen has been tied into that setup because of the long frame rails supporting the rear fender and bags. So we started by designing a fender that's taller and longer so we wouldn't have to build around them.
Once we eliminated that, we were left with complete design freedom to sculpt bags that visually flow along the bike and give a art-deco look. For total integration, we brought the look forward through the side covers and continued the triple chrome strips too. Now the really cool thing about this setup... the whole deal bolts up easily to standard mounting locations!
Since clean was the look, we opted to integrate the latch into the heel pad located at the front of the bags. This allows the doors to flow rearward smoothly in an uninterrupted arc. The spring loaded latching pin pops the door open slightly when the release is pulled. Heel pad can be covered in a range of materials to coordinate with the paint or seat cover options.
Basic functionality is excellent with roughly 40 liters of storage per side (compared to the 26 liter stock bags). Doors hinge forward so they won't accidentally pop open in the wind and are sealed against the elements with a thick rubber seal. Inside, the bags are fully lined to protect your cargo and the door latches lock to keep contents secure.
Constructed of our durable Fibertech material and available in primer or prepainted gloss black. Rear fender comes with an insert that covers a passenger seat mounting location. We're designing a whole lineup of saddles to work with this custom setup and making them modular so you can choose the components that match your needs. Please note that because of the complete redesign of the rear fender, your stock seat or existing aftermarket seat will not work with the Corbin Fleetliner setup. To be honest, the seats weren't done yet when we shot these bikes, so the only pics you'll find on this page shows the Hollywood solo mounted with the rear cover in place.
TAILLIGHT The license plate holder / taillight is included with your saddlebag setup. This model gives a perfected flushed-in look with integration of turn signals, tail light, brake light and license plate light. When the turn signal is activated, the corresponding half of the tail light flashes and glows in an arrow pattern. Comes to you in chrome finish and ready for install.
CORBIN SEAT. In this system, the saddle is one of the two items that is not included. The reason is simple... you need to choose the seat model that best suits your riding needs. Nearly all of the images on this page show the Hollywood solo model, but we're working hard on additional seat models now. If you've got a custom or stretched tank, we can work with you to make any of our seat models fit. In fact, we'll send you the basepan and foam shape so you can adjust it to fit your tank. Then you send it back to us for covering and you're ready to go!
EXHAUST. This is the other item that does not come with the Corbin Fleetliner kit. Although these cool Samson side exits were developed specially for the Corbin Fleetliner, we feel it's best if you go straight to the source for them. You'll save some coin that way and have access to their expert team of technicians. You can reach Samson on the web at: http://www.samsonusa.com/index.htm or call them toll free at: 1-888-572-6722.
Samson system is made with Stainless steel bodies with a show chromed slash cut, rolled edge tip. The complete exhaust system provides increased flow and better performance.
As you may notice from the above pics, the Fleetliner bags looks great with an OEM style fairing or combined with the Corbin Fleetliner fairing, front fender and chin spoiler. No coincidence there since all these sweet flowing components were designed by the same folks. Installation is suitable for the average home mechanic and complete instructions are included (naturally).
Fleetliner Saddlebag Setup Includes:
Side Covers set
License Plate frame / Taillight
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
We use a quality gel-coat for a nice finish that doesn't show material weave. When ordering parts in "primer gel-coat" you can expect a part ready for your painter's preparation. Most Corbin components are also available prepainted and ready for immediate installation.
Corbin Fleetliner saddlebags come fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the doors keeps out the elements. Locking doors keep contents secure.
Installs easily without any chassis modification. Really, no cutting or welding or anything, just bolt it together.
This saddlebag setup uses a completely different fender configuration, so it will not work with stock seats or standard Corbin seat models. A complete line of saddles will be available special to this setup.
When loading heavy items into the bags, be sure to place them in carefully. "Thowing" heavy items like disc locks into the bags can create cracks or stress marks in the paint on the outside.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Saddlebag set, Primer, Rolling Thunder 200 Chassis
Saddlebag set, Black, Rolling Thunder 200 Chassis
Saddlebag set, Primer, Rolling Thunder 250 Chassis
Saddlebag set, Black, Rolling Thunder 250 Chassis
We do not always have a color match for all brands and model. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
Please be sure to select/enter all options, if applicable, before clicking the "Add To Cart" button.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Corbin Motorcycle Saddles & Accessories Have Been Made with Pride in the USA since 1968