Following the release of the re-designed
Warbird for Harley's venerable FXR, it was just a matter of hours before the requests for a Dyna-Glide treatment came flooding in. Your wish is our command...
Warbird components are designed to work together for a unified look or can be used individually to convert a stock Dyna-Glide into a rolling work of art. Together the components capture the essence of classic Warbirds like the Corsair, Mustang and Thunderbolts for an aggressive stance and smooth aerodynamic line. The Dyna-Glide system is compised of:
| • |
Warbird Fairing |
| • |
Corbin Chin Spoiler |
| • |
Warbird Tail section |
| • |
Warbird Custom Saddle |
Warbird Fairing takes its lines from the tank and carries them through the front of the machine. Frame mounted design installs independently of the forks and sculpts to the shape of the OEM tank. Warbird fairing stays straight regardless of the handlebar direction so it always looks tight and aggressive. Corbin fairing hides frame tubes and wiring around the triple trees giving a very clean appearance.
Aerodynamically designed to cut through the wind while providing a degree of rider protection as well. Opens up a whole new world of opportunities for custom paint jobs, or you can have it painted to match your existing color scheme. Durable Fibertech construction comes in gel-coat ready for your painter's preparation. All mounting hardware and instructions are included.
Fairing includes the molded dash unit that mounts around the bars and really cleans up the installation. Also includes brackets to mount the gauges down and inside the fairing as shown. We've specifically designed our Warbird Fairing to work with two gauges as shown. Some models may use sizes or styles of gauges that may require special brackets (not included).
In order to access the ignition lock in front of the tank, we've engineered a door into the side of the Corbin fairing. Spring loaded hinge stays closed without the need for a lock or latch.
Chin Spoiler is designed to integrate the lines of the Dyna into the bottom end for a more visually streamlined look. Our spoiler flows over the frame downtubes with a large duct built into the design for proper engine cooling. We've designed this piece to work with the stock foot controls, but with a little simple modification it can work with forward controls if you've already installed a set of those.
We offer the spoiler in ABS ready for your painter to scuff and primer. Mounting is simple and we include all needed hardware and detailed instructions. This is a simple project for the average weekend mechanic. Constructed of ABS for a clean finish, durability and value.
For long term paint durability, many folks work with their painter for a little extra protection at the bottom because this is where you are most likely to get rock chips from the front tire. Likewise a small piece of clear contact paper would protect the paint and be virtually invisible and very simple to install or replace as needed.
Warbird Tail Section is designed to replace the fender and inner fender as a single unit. Gives the bike a fast and clean line at the back that really puts the Warbird look over the top. Includes an integrated license plate frame that is frenched in to keep that clean line. This special frame by RWD (Russ Wernimont Designs) features LED lighting that provides Tail Light, Brake Light and Turn Signals all in one.
Inside, the Warbird Tail provides a hideaway for small items like cell phones, summer gloves, GDO remotes and keys. We've even lined the inside to keep these items safe and secure. Please note the storage area is not as large as it appears from the outside as there is room inside for tire travel. Total storage volume is approximately 4 liters. Warbird tail section is designed to work with a special saddle from Corbin.
Warbird Tail uses our rotomolding process that molds the entire unit as a single piece with no seams. Using a special polyurethane material purpose built for Corbin, the tail section come to you very smooth and ready for your painter's final preparation and primer. Long lasting durability with an excellent finish and perfect fit!
Warbird Saddle is designed specifically for use on the above tail section. Using high density Comfort Cell foam to provide firm support with a very low profile, the Corbin saddle is the perfect finish. Wide, dished seating provides excellent weight distribution so you'll be happy to spend time on your bike. Topped off with genuine leather seating in your choice of colors and styles. Includes double row stitch pattern as shown.
Installs simply using a key lock system that integrates with the stock chassis and Corbin Warbird tail. Saddle bump pad uses two mounting pins to hold it in place on the Corbin tail section. Just pop the pad off to gain access to the storage area behind.
Original Warbird |
All together, the new Corbin Warbird system plays off the smooth lines of the original Corbin design while developing an identity all it's own. Both were inspired by the legendary planes of the 40's and pay homage to the heroic men who piloted them. Available only from Corbin, Purveyor of Fine Motorcycle Art!
A note about installation: Like most Corbin components, the Warbrid pieces are designed to bolt up to a stock chassis without requiring cutting, grinding or welding. However, please keep in mind that aftermarket components may already be installed on your bike. As such some of the Corbin components may need to be modified slightly for clearance or you may need to improvise brackets (ie for your gauge setup). That is why we highly recommend all pieces are test fit BEFORE you apply any paint.
