Corbin's saddle design greatly enhances the comfort of this awesome bike by ergonomically dispersing your weight over a greater area. Built up of Corbin's Comfort Cell® foam to provide miles and miles of supportive comfort. Our exclusive foam material feels firm at first, but doesn't break down like the stock foam keeping your body supported indefinitely for day long riding enjoyment.
Notice how the Corbin saddle not only offers a wider seating platform, but our foam shape has been dished out so it conforms to the shape of your body... this shaping helps to increase body contact area and eliminate hot spots. Naturally we shape the nose of the saddle narrow to allow for good ground reach while our Neutralized platform helps to reduce the tendency to slide toward the tank under braking. Inside, our exclusive foam material gives firm support that will break in for a custom fit over time.
Engineered to fit perfect to the tank, chassis and tail section, our solo saddle will work with the stock rear seat or cowling if you prefer. At this time we don't offer a passenger seat due to the minimal space provided... besides are any of you folks out riding two up on this bike? If so, drop us a line and we'll take it under advisement.
Our front saddle is manufactured with a fibertech basepan for unsurpassed fit that ride on rubber bumpers to protect the motorcycle's paint job. To make installation easier our seat comes ready to install with brackets pre-mounted on the saddle.
Includes genuine leather seating inserts for a true touch of luxury. We've come up with a slick cover design that allows for custom or subtle looks depending on your preference. Above we show the saddle decked out with Carbon-Fiber leather seating, a tasteful stitch pattern and Asphalt side panels for contrast. As an added touch, we've used a Moto-Sport themed logo tastefully embroidered in the side.
Leather seating will provide a surface that breathes with your body and will adapt with the foam during break in for a perfectly personalized fit. Just be sure to care for it properly with a quality leather conditioner like our Saddle Cream to help it age gracefully and remain weather resistant.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
Seating: Approx. 12.5" wide x 12.5" long Approx. seat height: 32"
Front saddle installs just like stock. Brackets are pre-installed on the seat so it's ready to go right out of the box. To protect your tail section, we recommend sliding the seat in REAR first, then lowering the nose into place and slide forward to engage the front tongue.
Once the tongue is in place, pull up on the back edge of the saddle and secure into stock locations using the included (longer than stock) bolts.
This seat model fits ONLY the 2011 model. A 2012 model is currently in process and will be available soon.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Want to test drive our Visual Seat Configurator? It's in Beta Testing now... Just click HERE.
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Front Saddle for 2011 BMW S1000 RR
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.